MAX® 10 FPGA 10M50 Evaluation Kit

You can use this kit to:
- Develop designs for the 10M50D, F484 package FPGA
- Validate MIPI CSI-2 passive D-PHY solutions for both MIPI Rx or Tx implementation within the FPGA (MIPI cameras and IP sold separately)
- Demonstrate video applications using the on-board HDMI output capability
- Interface the FPGA to the LPDDR2 memory at 200 MHz performance
- Read and write to the FPGA’s NOR flash memory
- Interface with daughtercards and peripherals using the Digilent Pmod* compatible connectors
- Bridge to external devices through single ended user I/O or LVDS I/O using the through-hole vias
- Measure FPGA power (Vcc_core)
- Reuse the kit’s PCB board and schematic as a model for your design
Ordering Information
MAX 10 10M50 Evaluation Kit Ordering Code and Pricing Information
Price |
Ordering Information |
|
---|---|---|
EK-10M50F484 |
Order online via the eStore or contact your local Intel FPGA distributor to place your order. |
Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.
Evaluation Kit Contents
The MAX 10 FPGA 10M50 Evaluation Kit includes:
- CE-compliant 10M50 evaluation board
- MAX 10 FPGA (10M50, dual power supply, 484-pin FBGA)
- Enpirion point-of-load Synchronous Buck Regulators with Integrated Inductors:
- EP5348UI, 400 mA
- EP5358LUI/HUI, 600 mA
- EP5329QI/5339QI, 2A/3A
- FPGA programming (.pof) or configuration (.sof) via:
- On-board Intel FPGA Download Cable II circuitry
- Optional 10-pin JTAG header
- On-board clocking circuitry
- 25 MHz single-ended, external oscillator clock source
- Silicon Labs Si510 crystal oscillator
- Silicon Labs Si5338 clock generator with programming frequency GUI
- Memory devices
- 1 Gbits (64M x 16) LPDDR2
- 512 Mbits quad serial peripheral interface (quad SPI) Flash
- Communication ports
- One HDMI video output
- Two 12-pin Pmod connectors
- Two 36-pin and one 16-pin FFC connectors (for MIPI cameras/modules)
- General User I/O
- General-purpose single-ended through-hole vias (2x5)
- General-purpose LVDS through-hole vias (2x9 LVDS pairs, plus two clock pairs)
- Five green user-defined LEDs
- Four user-defined push buttons
- Three user DIP switches
- Power
- Three yellow power-on LEDs
- USB Y cable (USB type-A to mini type-B) for both on-board Intel FPGA Download Cable II and 5 V/1 A power capability
- Supports a DC power adapter option (5 V power supply and cord are sold separately)
- Free Intel Quartus® Prime Lite Edition design software (download and license from website)
- Complete documentation
- User guide, bill of materials, schematic, and board files

Table 2. 10M50 Evaluation Kit Documents Available
Document |
Description |
Version |
---|---|---|
User Guide | Information about the evaluation board hardware and optional accessories (such as the MIPI cameras) |
1.0 |
Schematic | PCB schematic, board revision A | A1.2 |
Full installation of all files, including the user manual, BOM, layout, PCB, schematics, and all other documents or files |
15.1(1) |
- This kit installation works with Quartus Prime software v15.1.