Hard Processor System Component Reference Manual: Agilex™ 5 SoCs
ID
813752
Date
4/10/2025
Public
A newer version of this document is available. Customers should click here to go to the newest version.
1. Introduction to the Agilex™ 5 Hard Processor System Component
2. Configuring the Agilex™ 5 Hard Processor System Component
3. Simulating the Agilex™ 5 HPS Component
4. Simulating the Agilex™ 5 HPS bridges (H2F, LWH2F, and F2SDRAM)
5. Design Guidelines
6. Document Revision History for the Hard Processor System Component Reference Manual Agilex™ 5 SoCs
2.1. Parameterizing the HPS Component
2.2. HPS-FPGA Interfaces
2.3. SDRAM
2.4. HPS Clocks, Reset, Power
2.5. I/O Delays
2.6. Pin Mux and Peripherals
2.7. Generating and Compiling the HPS Component
2.8. Using the Address Span Extender Component
2.9. Configuring the Agilex™ 5 Hard Processor System Component Revision History
2.2.1.1. Enable MPU Standby and Event Signals
2.2.1.2. Enable General Purpose Signals
2.2.1.3. Enable Debug APB* Interface
2.2.1.4. Enable System Trace Macrocell (STM) Hardware Events
2.2.1.5. Enable SWJ-DP JTAG Interface
2.2.1.6. Enable FPGA Cross Trigger Interface
2.2.1.7. Enable AMBA* Trace Bus (ATB)
2.3.1. Configurations for HPS IP
2.3.2. Configurations for HPS EMIF IP
2.3.3. Graphical Connections of HPS to HPS-EMIF
2.3.4. Configuration when using ECC
2.3.5. Configuration of HPS EMIF Calibration Settings
2.3.6. Supported Memory Protocols Among Device Families
2.3.7. IO96 Bank and Lane Usage for HPS EMIF
2.3.8. Quartus Report of I/O Bank Usage
2.3.9. Debugging with the External Memory Interface Debug Toolkit
4.2. Generating the HPS Simulation Model in Platform Designer
- From the Platform Designer GUI, click Generate > Generate Testbench System.
Figure 52. Platform Designer GUI
- Ensure that the path to the Testbench is correct. Click Generate.
Figure 53. Testbench System
- The Platform Designer creates a file named simple_tb.v in the directory <project directory>/simple_tb/simple_tb/sim/.