F-Tile Dynamic Reconfiguration Design Example User Guide

ID 710582
Date 10/06/2023
Document Table of Contents
Give Feedback

1.2.1. CPRI Multirate Design Example Parameters

Figure 3. CPRI Multirate Example Design Tab
Table 2.  CPRI Multirate Design Example Parameters
Parameters Value Description
Select Protocol/mode CPRI Select the IP protocol for dynamic reconfiguration.
Select Base Variant 24G CPRI RS-FEC Select the configuration of base variant for dynamic reconfiguration.
Example Design Files Simulation


Simulation option generates the testbench and compilation-only project. Synthesis option generates the hardware design example.
Generated File Format Verilog


Select the HDL files format. If you select VHDL, you must simulate the testbench with a mixed-language simulator.
Target Development Kit None

Intel Agilex® 7 I-Series Transceiver-SoC Development Kit DK-SI-AGI027FA

Intel Agilex® 7 I-Series Transceiver-SoC Development Kit DK-SI-AGI027FB

Specify the target development kit for the hardware example design. This option is only available if you select the Synthesis option.