Intel® Cyclone® 10 GX Device Datasheet

ID 683828
Date 2/14/2022
Public
Document Table of Contents

Differential I/O Standards Specifications

Table 17.  Differential I/O Standards Specifications for Intel® Cyclone® 10 GX DevicesDifferential inputs are powered by VCCPT which requires 1.8 V.
I/O Standard VCCIO (V) VID (mV) 23 VICM(DC) (V) VOD (V)   24 VOCM (V)  24
Min Typ Max Min Condition Max Min Condition Max Min Typ Max Min Typ Max
LVDS  25 1.71 1.8 1.89 100 VCM = 1.25 V 0 DMAX ≤700 Mbps 1.85 0.247 0.6 1.125 1.25 1.375
1 DMAX >700 Mbps 1.6
RSDS 26 1.71 1.8 1.89 100 VCM = 1.25 V 0.3 1.4 0.1 0.2 0.6 0.5 1.2 1.4
Mini-LVDS 27 1.71 1.8 1.89 200 600 0.4 1.325 0.25 0.6 1 1.2 1.4
LVPECL 28 1.71 1.8 1.89 300 0.6 DMAX ≤700 Mbps 1.7
1 DMAX >700 Mbps 1.6
23 The minimum VID value is applicable over the entire common mode range, VCM.
24 RL range: 90 ≤ RL ≤ 110 Ω.
25 For optimized LVDS receiver performance, the receiver voltage input range must be within 1.0 V to 1.6 V for data rates above 700 Mbps and 0 V to 1.85 V for data rates below 700 Mbps.
26 For optimized RSDS receiver performance, the receiver voltage input range must be within 0.25 V to 1.45 V.
27 For optimized Mini-LVDS receiver performance, the receiver voltage input range must be within 0.1 V to 1.625 V.
28 For optimized LVPECL receiver performance, the receiver voltage input range must be within 0.85 V to 1.75 V for data rates above 700 Mbps and 0.45 V to 1.95 V for data rates below 700 Mbps.

Did you find the information on this page useful?

Characters remaining:

Feedback Message