F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide

Download PDF
ID 683804
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example: Single IP Core Instantiation 3. Design Example: Single IP Core Instantiation with Precision Time Protocol 4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training 5. Design Example: Multiple IP Core Instantiation 6. Design Example: Two Separate Instances of Auto-Negotiation and Link Training and Ethernet IP Design 7. F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide Archives 8. Document Revision History for the F-Tile Ethernet Intel FPGA Hard IP Design Example User Guide
1. Quick Start Guide x
1.1. Generating the Design 1.2. Directory Structure 1.3. Simulating the Design Example Testbench 1.4. Hardware and Software Requirements 1.5. Compiling and Configuring the Design Example in Hardware 1.6. Testing the F-Tile Ethernet Intel FPGA Hard IP Hardware Design Example 1.7. Register Maps
1.1. Generating the Design x
1.1.1. Generating Single IP Instance Design 1.1.2. Generating Two Separate Instances of IP Design 1.1.3. Generating Multiple IP Instance Design
1.3. Simulating the Design Example Testbench x
1.3.1. Fast Sim Model for FGT Variants 1.3.2. Fast Sim Model for FHT Variants
2. Design Example: Single IP Core Instantiation x
2.1. Features 2.2. Functional Description 2.3. Simulation 2.4. Packet Client Registers
2.2. Functional Description x
2.2.1. Variation: F-Tile Ethernet Intel FPGA Hard IP with FHT PMA
2.3. Simulation x
2.3.1. Simulation Testbench Flow for MAC Mode 2.3.2. Simulation Testbench Flow for PCS, OTN, and FlexE Modes
3. Design Example: Single IP Core Instantiation with Precision Time Protocol x
3.1. Features 3.2. Functional Description 3.3. Simulation 3.4. Hardware Design Example 3.5. Registers
4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training x
4.1. Features 4.2. Functional Description 4.3. Simulation 4.4. QSF Assignments 4.5. Hardware Design Example
5. Design Example: Multiple IP Core Instantiation x
5.1. Features 5.2. Functional Description 5.3. Simulation
6. Design Example: Two Separate Instances of Auto-Negotiation and Link Training and Ethernet IP Design x
6.1. Features 6.2. Functional Description 6.3. Simulation 6.4. QSF Assignments 6.5. Hardware Design Example
1. Quick Start Guide
2. Design Example: Single IP Core Instantiation
3. Design Example: Single IP Core Instantiation with Precision Time Protocol
4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training
5. Design Example: Multiple IP Core Instantiation
6. Design Example: Two Separate Instances of Auto-Negotiation and Link Training and Ethernet IP Design
7. F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide Archives
8. Document Revision History for the F-Tile Ethernet Intel FPGA Hard IP Design Example User Guide

2.4. Packet Client Registers

Table 9.  Packet Client Registers for MAC Segmented Interface and MAC Avalon® ST InterfaceYou can customize the F-Tile Ethernet Intel FPGA Hard IP hardware design example by programming the packet client registers.
Note: All address offsets are specified in the byte address format.
Address Name Bit Offset Default Value Access Description
0x00 hw_pc_ctrl 0 1'b0 RW Indicates start and stop of the TX packet.
  • 0: Stop packet generator
  • 1: Start packet generator
2 1'b0 RW Indicates packet transmission mode.
  • 0: One time mode
  • 1: Continuous mode

When you switch from continuous to one time mode, you must set hw_pc_ctrl[0] to 1 to ensure the pending packet transmission is completed.

4 1'b0 RW Indicates packet client loopback.
  • 0: Packet generator data path
  • 1: Loopback client data path
6 1'b0 RW Indicates the snapshot status for all statistics counter registers.
  • 0: No snapshot
  • 1: Snapshot available
7 1'b0 RW Indicates the clear status of the snapshot registers.
  • 0: Do not clear the internal registers
  • 1: Clear the internal registers
8 1'b0 RW Indicates the EOP of TX packet and clears counters.
0xC Loopback_FIFO_status [0] 0 RW Loopback FIFO write full error
[1] 0 RW Loopback FIFO read empty error
[15"2] 14'h0000 RW Reserved. Default 0s.
0x1C Cfg_rom_pkt_gap_addr [4:0] 0 RW

Gap insertion between the packets. mac seg : min gap = 1 (to avoid multiple inframes in a cycle); max gap = 31, avst: min gap = 0; max gap = 31

[31:5] 0 RW Reserved. Default 0s.
0x04 hw_test_loop_cnt [15:0] 16'd1 RW Indicates the number of times the ROM packet data are sent.
0x08 hw_test_rom_addr [15:0] 16'd0 RW ROM packet data start address
[31:16] 16'd0 RW ROM packet data end address
0x10 Latency Reg [7:0] 8'h00 RO Latency Value in terms of o_clk_pll
[30:8] 23'd0 RO Reserved
[31] 0 RW Latency enable bit (self- clearing)
0x14 cfg_rom_da_addr [31:0] 0 RW Destination address LSB 32 bits
0x18 Cfg_rom_da_adr_h [15:0] 0 RW Destination address LSB 16 bits
[16] 0 RW 16th bit = 1/10 to enable/disable DA insertion
[31:17] 0 RW Reserved. Default 0s
0x20 stat_tx_sop_cnt_lsb [31:0] 32'b0 RO Lower 32-bits of the TX start-of-packet (SOP) counter
0x24 stat_tx_sop_cnt_msb [31:0] 32'b0 RO Upper 32-bits of the TX start-of-packet (SOP) counter
0x28 stat_tx_eop_cnt_lsb [31:0] 32'b0 RO Lower 32-bits of the TX end-of-packet (EOP) counter
0x2C stat_tx_eop_cnt_msb [31:0] 32'b0 RO Upper 32-bits of the TX end-of-packet (EOP) counter
0x30 stat_tx_err_cnt_lsb [31:0] 32'b0 RO Lower 32-bits of the TX error counter
0x34 stat_tx_err_cnt_msb [31:0] 32'b0 RO Upper 32-bits of the TX error counter
0x38 stat_rx_sop_cnt_lsb [31:0] 32'b0 RO Lower 32-bits of the RX start-of-packet (SOP) counter
0x3C stat_rx_sop_cnt_msb [31:0] 32'b0 RO Upper 32-bits of the RX start-of-packet (SOP) counter
0x40 stat_rx_eop_cnt_lsb [31:0] 32'b0 RO Lower 32-bits of the RX end-of-packet (EOP) counter
0x44 stat_rx_eop_cnt_msb [31:0] 32'b0 RO Upper 32-bits of the RX end-of-packet (EOP) counter
0x48 stat_rx_err_cnt_lsb [31:0] 32'b0 RO Lower 32-bits of the RX error counter
0x4C stat_rx_err_cnt_lsb [31:0] 32'b0 RO Upper 32-bits of the RX error counter
Table 10.  Packet Client Registers for PCS, OTN, and FlexE InterfaceYou can customize the F-Tile Ethernet Intel FPGA Hard IP hardware design example by programming the packet client registers.
Note: All address offsets are specified in the byte address format.
Address Name Bit Offset Default Value Access Description
0x10 cfg_start_pkt_gen 0 1'b0 RW Indicates start and stop of the TX packet.
  • 0: Stop packet generator.
  • 1: Start packet generator.
0x58 cfg_clear_counters 0 1'b0 RW When set, clears packet generator counters.
0x18 stat_tx_sop_cnt [31:0] 32'b0 RO Lower 32-bits of the TX start-of-packet (SOP) counter
0x1C stat_tx_sop_cnt [63:32] 32'b0 RO Upper 32-bits of the TX start-of packet (SOP) counter
0x20 stat_tx_eop_cnt [31:0] 32'b0 RO Lower 32-bits of the TX end-of-packet (EOP) counter
0x24 stat_tx_eop_cnt [63:32] 32'b0 RO Upper 32-bits of the TX end-of-packet (EOP) counter
0x30 stat_rx_sop_cnt [31:0] 32'b0 RO Lower 32-bits of the RX start-of-packet (SOP) counter
0x34 stat_rx_sop_cnt [63:32] 32'b0 RO Upper 32-bits of the RX start-of-packet (SOP) counter
0x38 stat_rx_eop_cnt [31:0] 32'b0 RO Lower 32-bits of the RX end-of-packet (EOP) counter
0x3C stat_rx_eop_cnt [63:32] 32'b0 RO Upper 32-bits of the RX end-of-packet (EOP) counter
0x50 stat_rx_err_cnt [31:0] 32'b0 RO Lower 32-bits of the RX error status
0x54 stat_rx_err_cnt [63:32] 32'b0 RO Upper 32-bits of the RX error status

For information about register base and offset addresses, refer to the F-Tile Ethernet Intel FPGA Hard IP User Guide.

Related Information
Level Two Title