Visible to Intel only — GUID: vgo1401361924908
Ixiasoft
Visible to Intel only — GUID: vgo1401361924908
Ixiasoft
7.1. HDMI Source Parameters
Parameter | Value | Description |
---|---|---|
Device family |
|
Targeted device family. This parameter inherits the value from the project device. |
Direction | Transmitter Receiver |
Select HDMI transmitter. |
Pixels per clock | 2 or 8 pixels per clock | Determines how many pixels are processed per clock.
Note: This parameter is available only with Intel® Arria® 10 and Intel® Stratix® 10 devices.
|
Transceiver width | 20 or 40 bits | Determines the required transceiver width. The transceiver width depends on the number of TMDS symbols processed in parallel (symbols per clock).
Note: This parameter is available only with Intel® Arria® 10 and Intel® Stratix® 10 devices.
|
Enable active video protocol | AXIS-VVP Full,None | Determines the input video data format. When set to AXIS-VVP full, the video input follows the AXI streaming VVP full specification (Intel FPGA Streaming Video Protocol Specification). When set to None, the video input is in clocked video format. |
HDMI 2.1 Variant | FRL and TMDS | Selecting FRL and TMDS variant causes HDMI IP to support both FRL and TMDS modes. |
Support auxiliary | On, Off | Determines if auxiliary channel encoding is included. This parameter is turned on by default. This parameter is always turned on when Support FRL is enabled. |
Support deep color | On, Off | Determines if the core can encode deep color formats. This parameter is turned on by default. |
Support audio | On, Off | Determines if the core can encode audio data. To enable this parameter, you must also enable the Support auxiliary parameter. This parameter is turned on by default. |
Support FRL | On, Off | Turn on to enable the FRL path. When enabled, the clock domains for the auxiliary and audio ports, and the internal modules are different Refer to the block diagram for more details.
Note: This parameter is available only with Intel® Arria® 10 and Intel® Stratix® 10 devices.
|
Support HDCP 2.3 | On, Off | Turn on to enable HDCP 2.3 TX support. This parameter can only be used with Intel® Arria® 10 and Intel® Stratix® 10 devices.
Note: The HDCP-related parameters are not included in the Intel® Quartus® Prime Pro Edition software. To access the HDCP feature, contact Intel at https://www.intel.com/content/www/us/en/broadcast/products/programmable/applications/connectivity-solutions.html.
|
Support HDCP 1.4 | On, Off | Turn on to enable HDCP 1.4 TX support. This parameter can only be used with Intel® Arria® 10 and Intel® Stratix® 10 devices.
Note: The HDCP-related parameters are not included in the Intel® Quartus® Prime Pro Edition software. To access the HDCP feature, contact Intel at https://www.intel.com/content/www/us/en/broadcast/products/programmable/applications/connectivity-solutions.html.
|
Support HDCP Key Management | On, Off | Turn on to enable HDCP key management support. You can only turn on this parameter if you turn on the Support HDCP 1.4 or Support HDCP 2.3 parameters.
Note:
|
Include I2C Master/Slave | On, Off | Turn on to include a pair of I2C controller on TX for DDC operation. |
When Enable Active Video Protocol is set to AXIS-VVP Full, Advanced Configuration tab appears in the HDMI source GUI. Advanced Configuration tab contains the parameter below.
Parameter | Value | Description |
Video in and out use the same clock | On, Off |
You shall set the axi4s_clk to a fixed clock frequency. The axi4s_clk clock frequency must be equal or greater than the actual pixel rate / pixels per clock. |
Enable user-defined packet support | On, Off | When set to On, user defined packet support is enabled. You can transmit auxiliary data through the user packet register configuration using host processor. When set to Off, user defined packet support is disabled. |
Enable AXIS auxiliary packet interface | On, Off | When set to On, AXI4-stream auxiliary packet interface is enabled. You can transmit auxiliary data through AXI4-stream auxiliary packet interface. When set to Off, AXI4-stream auxiliary packet interface support is disabled. |