Intel Agilex® 7 Configuration User Guide

ID 683673
Date 2/05/2024
Public
Document Table of Contents

2.6.1. Setting Configuration Clock Source

You must specify the configuration clock source by selecting either the internal oscillator or OSC_CLK_1 with the supported frequency. By default, the SDM uses the internal oscillator for device configuration. Specify an OSC_CLK_1 clock source for the fastest configuration time.

Complete the following steps to select the configuration clock source:

  1. To specify OSC_CLK_1 as the clock source, on the Assignments menu, click Device.
  2. In the Device and Pin Options dialog box, select the General category.
  3. Specify the configuration clock source from the Configuration clock source drop down menu.
    Figure 17. Specifying the Configuration Clock Source
  4. Click OK to confirm and close the Device and Pin Options.