Visible to Intel only — GUID: fpe1679619357564
Ixiasoft
3.5.2.5.1. Build and Install Netdev Driver
3.5.2.5.2. Enable VFs if SRIOV is Supported
3.5.2.5.3. Configure the Number of Channels Supported on the Device
3.5.2.5.4. Configure the MTU Value
3.5.2.5.5. Configure the Device Communication
3.5.2.5.6. Configure Transmit Queue Selection Mechanism
3.5.2.5.7. Test Procedure by Using Name Space Environment
3.5.2.5.8. PIO Test
Visible to Intel only — GUID: fpe1679619357564
Ixiasoft
3.3.5.1. Steps to Run the Simulation : QuestaSim* / Questa* Intel® FPGA Edition
Simulation Directory
<example_design>/pcie_ed_tb/ pcie_ed _tb/sim/mentor/
Instructions
- Invoke vsim (by typing vsim, which brings up a console window where you can run the following commands).
-
do msim_setup.tcl
Note: Alternatively, instead of doing Steps 1 and 2, you can type: vsim -c -do msim_setup.tcl -
ld_debug
-
run -all
- A successful simulation ends with the following message: "Simulation stopped due to successful completion!"