Intel® Acceleration Stack for Intel® Xeon® CPU with FPGAs Version 1.3.1 Release Notes: Intel FPGA Programmable Acceleration Card N3000-N

ID 683474
Date 6/16/2021

Intel FPGA PAC N3000-N Reference Table

The following table provides key firmware (FW) versions for this release. To identify the current firmware version in your Intel FPGA PAC N3000-N, use the OPAE command: fpgainfo fme.

Note: Only install OPAE tools and drivers that correspond to your specific software package.
Table 2.   Intel FPGA PAC N3000-N FPGA Flash User and Factory Partition

Production boards come with an FPGA flash programmed with Intel® -provided manufacturing test images in the user and factory partition. You must flash the card with your own user image.

FPGA Flash Configuration Bitstream ID
User Partition 4x25 GbE 0x23000110010310
Factory Partition 2x2x25 GbE 0x23000410010310
Table 3.   Intel FPGA PAC N3000-N Board Management Controller Firmware and RTL Reference Table
Intel® Acceleration Stack Version Intel® MAX® 10 Nios® FW Intel® MAX® 10 Build
1.3.1 D.2.1.24 D.2.0.7
Note: Non-production (ES) Intel FPGA PAC N3000-N is shipped with Intel® MAX® 10 Nios® firmware and Intel® MAX® 10 RTL build version D.2.0.21 and D.2.0.6 respectively. Between ES and Production versions, two MAX10 BMC updates have been released, D.2.1.23/D.2.0.7 and 2.1.24/D.2.0.7. These Intel® MAX® 10 BMC updates are available on the Intel Resource and Design Center. Contact your Intel support representative to access these updates.