MAX 10 Embedded Multipliers User Guide

ID 683467
Date 2/21/2017
Public
Document Table of Contents

2.2.1. 18-Bit Multipliers

You can configure each embedded multiplier to support a single 18 x 18 multiplier for input widths of 10 to 18 bits.

The following figure shows the embedded multiplier configured to support an 18-bit multiplier.

Figure 3. 18-Bit Multiplier Mode

All 18-bit multiplier inputs and results are independently sent through registers. The multiplier inputs can accept signed integers, unsigned integers, or a combination of both. Also, you can dynamically change the signa and signb signals and send these signals through dedicated input registers.

Did you find the information on this page useful?

Characters remaining:

Feedback Message