Intel Agilex® 7 Embedded Memory User Guide

ID 683241
Date 6/26/2023

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Give Feedback

4.3.15. Guidelines for Embedded Memory ECC Feature

The Intel Agilex® 7 FIFO Intel® FPGA IP cores support embedded memory ECC for M20K memory blocks. The built-in ECC feature in the Intel Agilex® 7 devices can perform:

  • Single-error detection and correction
  • Double-adjacent-error detection and correction
  • Triple-adjacent-error detection

You can turn on FIFO Embedded ECC feature by enabling enable_ecc parameter in the FIFO Intel® FPGA IP GUI.

Note: Embedded memory ECC feature is only available for M20K memory block type.
Note: The embedded memory ECC supports variable data width. When ECC is enabled, RAM combines multiple M20K blocks in the configuration of 32 (width) x 512 (depth) to fulfill your instantiation. The unused data width is tied to the VCC internally.
Note: The embedded memory ECC feature is not supported in mixed-width mode.
Figure 48. ECC Option in FIFO Intel® FPGA IP GUI

When you enable the ECC feature, a 2-bit wide error correction status port (eccstatus[1:0]) is created in the generated FIFO entity. These status bits indicate whether the data that is read from the memory has an error in single-bit with correction, fatal error with no correction, or no error bit.

  • 00: No error
  • 01: Illegal
  • 10: A correctable error occurred and the error has been corrected at the outputs; however, the memory array has not been updated.
  • 11: An uncorrectable error occurred and uncorrectable data appears at the output