Intel® Quartus® Prime Pro Edition User Guide: Design Compilation

ID 683236
Date 6/21/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents Hierarchical Design Configurations

A design can have more than one configuration. For example, you can define a configuration that specifies the source code you use in particular instances in a sub-hierarchy, and then define a configuration for a higher level of the design.

For example, suppose a subhierarchy of a design is an eight-bit adder, and the RTL Verilog code describes the adder in a logical library named rtllib. The gate-level code describes the adder in the gatelib logical library. If you want to use the gate-level code for the 0 (zero) bit of the adder and the RTL level code for the other seven bits, the configuration might appear as follows:

Gate-level code for the 0 (zero) bit of the adder

config cfg1;
design aLib.eight_adder;
default liblist rtllib;
instance adder.fulladd0 liblist gatelib;

If you are instantiating this eight-bit adder eight times to create a 64-bit adder, use configuration cfg1 for the first instance of the eight-bit adder, but not in any other instance. A configuration that performs this function is shown below:

Use configuration cfg1 for first instance of eight-bit adder

config cfg2;
design bLib.64_adder;
default liblist bLib;
instance top.64add0 use work.cfg1:config;
Note: The name of the unbound module may be different from the name of the cell that is bounded to the instance.