F-Tile Serial Lite IV Intel® FPGA IP User Guide

ID 683074
Date 11/16/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.4.2. RX Reset and Initialization Sequence

The RX reset sequence for F-Tile Serial Lite IV Intel® FPGA IP is as follows:
  1. Assert rx_pcs_fec_phy_reset_n, rx_core_rst_n, and reconfig_reset simultaneously to reset the F-tile hard IP, MAC, and reconfiguration blocks. Release rx_pcs_fec_phy_reset_n and reconfiguration reset after waiting for rx_reset_ack to ensure the blocks are properly reset.
  2. The IP then asserts the phy_rx_pcs_ready signal after the custom PCS reset is released, to indicate RX PHY is ready for transmission.
  3. The rx_core_rst_n signal deasserts after phy_rx_pcs_ready signal goes high.
  4. The IP starts the lane alignment process after the RX MAC reset is released and upon receiving ALIGN paired with START/END or END/START CW.
  5. The RX deskew block asserts the rx_link_up signal once alignment for all lanes has complete.
  6. The IP then asserts the rx_link_up signal to the user logic to indicate that the RX link is ready to start data reception.
Figure 27. RX Reset and Initialization Timing Diagram