Intel® Stratix® 10 Hard Processor System Remote System Update User Guide

ID 683021
Date 2/23/2024
Document Table of Contents Creating Initial Flash Image for HPS First

Creating the initial flash image for HPS first is similar with creating the initial flash image for FPGA first, with a few small changes described below.

Instead of JTAG Indirect Configuration File (.jic), select the Raw Binary File for HPS Core Configuration (.rbf) then check the JTAG Indirect Configuration File for Periphery Configuration (. jic), Memory Map File (.map), and the Raw Programming Data File (.rpd) options as shown below.

You can also make the factory image and application image partitions much smaller, because they do not store the FPGA fabric configuration data.

After clicking the Generate button the following additional files are generated:

  • initial_image_FACTORY_IMAGE.core.rbf—containing the FPGA fabric configuration data for the factory image.
  • initial_image_P1.core.rbf—containing FPGA fabric configuration data for the application image P1.