1. GTS HDMI IP Quick Reference
2. About the GTS HDMI IP
3. GTS HDMI IP Getting Started
4. GTS HDMI IP Hardware Design Examples
5. HDMI Source
6. HDMI Sink
7. Transceiver Handling (HDMI Wrapper = HDMI and Transceiver)
8. GTS HDMI IP Parameters
9. HDMI Simulation Example
10. GTS HDMI IP User Guide Archives
11. Document Revision History for the GTS HDMI IP User Guide
5.1.1. Source Scrambler, TMDS/TERC4 Encoder
5.1.2. Source Video Resampler
5.1.3. Source Window of Opportunity Generator
5.1.4. Source Auxiliary Packet Encoder
5.1.5. Source Auxiliary Packet Generators
5.1.6. Source Auxiliary Data Path Multiplexers
5.1.7. Source Auxiliary Control Port
5.1.8. Source Audio Encoder
5.1.9. TX Core-PHY Interface
5.1.10. I2C Controller
6.1.1. Sink Word Alignment and Channel Deskew
6.1.2. Sink Descrambler, TMDS/TERC4 Decoder
6.1.3. Sink Auxiliary Decoder
6.1.4. Sink Auxiliary Packet Capture
6.1.5. Sink Video Resampler
6.1.6. Sink Auxiliary Data Port
6.1.7. Sink Audio Decoder
6.1.8. Status and Control Data Channel (SCDC) Interface
6.1.9. RX Core-PHY Interface
6.1.10. I2C Target
6.1.11. I2C and EDID RAM Blocks
2.2. GTS HDMI IP Device Feature Support
Feature | Device | Support Level |
---|---|---|
HDMI Variant = TMDS only | Agilex™ 5 E-Series | Preliminary |
The GTS HDMI IP does not support:
- FRL and TDMS
- HDMI 2.1
The following terms define IP feature support levels for GTS HDMI IP:
- Preliminary support—The IP meets the functional requirement for the feature set as listed in this user guide. The IP can be used in production designs for the supported device family with caution.
- Final support—The IP is compliant to the protocol CTS requirement for the supported device family and can be used in production design. Characterization report and system level design guidelines are available to facilitate meeting PHY CTS requirements.