Visible to Intel only — GUID: wns1654815962221
Ixiasoft
1. Introduction
2. Interface Overview
3. Parameters
4. Designing with the IP Core
5. Functional Description
6. Configuration Registers for MACsec IP
7. MACsec Intel® FPGA IP Example Design
8. MACsec Intel FPGA IP User Guide Archives
9. Document Revision History for the MACsec Intel FPGA IP User Guide
2.2.1.1. Common Port Mux Interface
2.2.1.2. Common Port Demux Interface
2.2.1.3. Controlled Port Mux Interface
2.2.1.4. Controlled Port Demux Interface
2.2.1.5. Uncontrolled Port RX Interface
2.2.1.6. Uncontrolled Port TX Interface
2.2.1.7. Crypto RX Interface
2.2.1.8. Crypto TX Interface
2.2.1.9. Management Interface
2.2.1.10. Decrypt Port Mux Management Interface
2.2.1.11. Decrypt Port Demux Management Interface
2.2.1.12. Encrypt Port Mux Management Interface
2.2.1.13. Encrypt Port Demux Management Interface
2.2.1.14. Crypto IP Management Bus
2.2.1.15. Miscellaneous Control Signals
2.2.2.1. Common Port Mux Interface Waveform
2.2.2.2. Common Port Demux Interface Waveform
2.2.2.3. Controlled Port Mux Interface Waveform
2.2.2.4. Controlled Port Demux Interface Waveform
2.2.2.5. Uncontrolled Port RX Interface Waveform
2.2.2.6. Uncontrolled Port TX Interface Waveform
2.2.2.7. Crypto RX Waveform
2.2.2.8. Crypto TX Waveform
2.2.2.9. MACsec Management Interface (Read)
2.2.2.10. MACsec Management Interface (Write)
Visible to Intel only — GUID: wns1654815962221
Ixiasoft
5.1.4. AXI-ST Ready Latency
Figure 22. AXI-ST Ready Latency
The MACsec IP implements a configurable AXI-ST ready latency. The supported range of ready latency is 0-16. All the AXI-ST responders for AES and IP user interfaces implement this ready latency and it can be configured in the IP GUI.