MACsec Intel® FPGA IP User Guide

Download PDF
ID 736108
Date 12/19/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. Interface Overview 3. Parameters 4. Designing with the IP Core 5. MACsec Intel® FPGA IP Example Design 6. Functional Description 7. Configuration Registers for MACsec IP 8. MACsec Intel FPGA IP User Guide Archives 9. Document Revision History for the MACsec Intel FPGA IP User Guide
1. Introduction x
1.1. Terminology 1.2. IP Core Overview 1.3. Release Information 1.4. Device Family Support 1.5. Device Speed Grade Support and Theoretical Throughput 1.6. Resource Utilization
1.2. IP Core Overview x
1.2.1. IP Description 1.2.2. IP Core Applications
1.2.2. IP Core Applications x
1.2.2.1. SmartNIC 1.2.2.2. Ethernet Bridge + Inline MACsec
2. Interface Overview x
2.1. Block Diagram 2.2. Interfaces 2.3. Clocking Domains
2.2. Interfaces x
2.2.1. IP Interface Signals 2.2.2. IP Interface Signal Timing Diagram/Waveforms 2.2.3. Clocks, Resets, and Interrupts
2.2.1. IP Interface Signals x
2.2.1.1. Common Port Mux Interface 2.2.1.2. Common Port Demux Interface 2.2.1.3. Controlled Port Mux Interface 2.2.1.4. Controlled Port Demux Interface 2.2.1.5. Uncontrolled Port RX Interface 2.2.1.6. Uncontrolled Port TX Interface 2.2.1.7. Crypto RX Interface 2.2.1.8. Crypto TX Interface 2.2.1.9. Management Interface 2.2.1.10. Decrypt Port Mux Management Interface 2.2.1.11. Decrypt Port Demux Management Interface 2.2.1.12. Encrypt Port Mux Management Interface 2.2.1.13. Encrypt Port Demux Management Interface 2.2.1.14. Crypto IP Management Bus
2.2.2. IP Interface Signal Timing Diagram/Waveforms x
2.2.2.1. Common Port Mux Interface Waveform 2.2.2.2. Common Port Demux Interface Waveform 2.2.2.3. Controlled Port Mux Interface Waveform 2.2.2.4. Controlled Port Demux Interface Waveform 2.2.2.5. Uncontrolled Port RX Interface Waveform 2.2.2.6. Uncontrolled Port TX Interface Waveform 2.2.2.7. Crypto RX Waveform 2.2.2.8. Crypto TX Waveform 2.2.2.9. MACsec Management Interface (Read) 2.2.2.10. MACsec Management Interface (Write)
3. Parameters x
3.1. MACsec Intel FPGA IP Parameter Settings
4. Designing with the IP Core x
4.1. Installing and Licensing Intel® FPGA IP Cores 4.2. Specifying the IP Core Parameters and Options 4.3. Generated File Structure 4.4. Reset Transactions 4.5. MACsec Software Initialization Sequence 4.6. Switching Port Muxes between Store and Forward and Cut-Through Modes
4.1. Installing and Licensing Intel® FPGA IP Cores x
4.1.1. Intel® FPGA IP Evaluation Mode
5. MACsec Intel® FPGA IP Example Design x
5.1. Port Configurations 5.2. Multi Interface Buffering Muxing/Demuxing 5.3. 2x25 GbE (Encryption + Decryption) 5.4. Packet Generator/Checker 5.5. Clocking
6. Functional Description x
6.1. AXI-ST Common/Controlled/Uncontrolled Ports 6.2. Packet Parser and Classifier 6.3. SA Lookup and Update 6.4. Encryption Framer/DeFramer 6.5. Decryption Framer/Deframer 6.6. Packet Aggregator/Disaggregator 6.7. Cryptographic AES 6.8. Error Handling 6.9. Packet Statistics
6.1. AXI-ST Common/Controlled/Uncontrolled Ports x
6.1.1. AXI-ST Single Packet Mode 6.1.2. AXI-ST Multi Packet Mode 6.1.3. User Interface Data Streaming 6.1.4. AXI-ST Ready Latency 6.1.5. Port and Secure Channel Mapping 6.1.6. Port and Crypto Channel Mapping 6.1.7. Minimum Packet Size 6.1.8. Byte Ordering 6.1.9. Controlled/Uncontrolled Port Muxing
6.1.3. User Interface Data Streaming x
6.1.3.1. Single Packet Mode Data Stream 6.1.3.2. Multi Packet Mode Data Stream
6.2. Packet Parser and Classifier x
6.2.1. Packet Parser 6.2.2. Packet Classifier
6.3. SA Lookup and Update x
6.3.1. Packet Actions 6.3.2. Packet Buffer 6.3.3. New Channel Assignment 6.3.4. Anti-Replay Protection
6.3.1. Packet Actions x
6.3.1.1. Packet Encrypt 6.3.1.2. Packet Decrypt 6.3.1.3. Packet Discard 6.3.1.4. PDU Validation
6.4. Encryption Framer/DeFramer x
6.4.1. Channel Allocation 6.4.2. Packet Framer 6.4.3. VLAN Tagging
6.4.2. Packet Framer x
6.4.2.1. Bypass Packet 6.4.2.2. Stream Interleaving
6.4.3. VLAN Tagging x
6.4.3.1. No VLAN Tag 6.4.3.2. VLAN Tag (Not in Clear) 6.4.3.3. VLAN Tag (Clear)
6.5. Decryption Framer/Deframer x
6.5.1. XPN Recovery 6.5.2. Replay Check Update 6.5.3. Packet Deframer
6.6. Packet Aggregator/Disaggregator x
6.6.1. Packet Aggregator 6.6.2. Packet Disaggregator
6.7. Cryptographic AES x
6.7.1. Register Address Ordering 6.7.2. Byte Order Swapping 6.7.3. Byte Ordering
6.8. Error Handling x
6.8.1. Packet Error Handling 6.8.2. Memory Blocks ECC Errors 6.8.3. Crypto Errors 6.8.4. System-Level Errors
1. Introduction
2. Interface Overview
3. Parameters
4. Designing with the IP Core
5. MACsec Intel® FPGA IP Example Design
6. Functional Description
7. Configuration Registers for MACsec IP
8. MACsec Intel FPGA IP User Guide Archives
9. Document Revision History for the MACsec Intel FPGA IP User Guide

2.2.1.10. Decrypt Port Mux Management Interface

Note: This interface is used to switch the Decrypt Port Mux from "Store and Forward" mode to "Cut Through" mode.
Table 16.  Decrypt Port Mux Management Interface
Signal Name Width Direction Description
rx_mux_app_pp_lite_awaddr 25 Input Write address
rx_mux_app_pp_lite_awvalid 1 Input Write address valid
rx_mux_app_pp_lite_wdata 64 Input Write data
rx_mux_app_pp_lite_wstrb 7 Input Indicates the byte lanes that hold valid data
rx_mux_app_pp_lite_wvalid 1 Input Write data valid
rx_mux_app_pp_lite_bready 1 Input Indicates that the master can accept a write response
rx_mux_app_pp_lite_araddr 25 Input Read address
rx_mux_app_pp_lite_arvalid 1 Input Read address channel valid
rx_mux_app_pp_lite_rready 1 Input Indicates that the master can accept the read data and response
rx_mux_pp_app_lite_awready 1 Output Indicates slave is ready to accept a write transaction
rx_mux_pp_app_lite_wready 1 Output Indicates that the salve can accept the write data
rx_mux_pp_app_lite_bresp 2 Output Indicates the status of the write transaction
rx_mux_pp_app_lite_bvalid 1 Output Write response valid
rx_mux_pp_app_lite_arready 1 Output Indicates that the slave is ready to accept an read address transaction
rx_mux_pp_app_lite_rdata 64 Output Read data
rx_mux_pp_app_lite_rvalid 1 Output Read data valid
rx_mux_pp_app_lite_rresp 2 Output Indicates the status of the read transfer
rx_mux_pp_app_rst_rdy 1 Output When 1'b1, indicates that the mux has completed its reset sequence, is currently out of reset, and is ready for a new reset sequence.
rx_mux_pp_app_cold_rst_ack_n 1 Output Acknowledge signal for mux's internal subsystem_cold_rst_n. Active low.
rx_mux_pp_app_warm_rst_ack_n 1 Output Acknowledge signal for mux's internal subsystem_warm_rst_n. Active low.
Level Two Title