Intel® FPGA SDK for OpenCL™ Pro Edition: Programming Guide

ID 683846
Date 6/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4. Managing an FPGA Board

The Intel® FPGA SDK for OpenCL™ includes utility commands you can invoke to install, uninstall, diagnose, and program your FPGA board.
Note: Starting from the 20.3 release, support for Windows and Linux OpenCL BSPs is removed. Use version 20.2 or older OpenCL BSPs available at FPGA Software Download Center as a reference. If you want to migrate your OpenCL BSP to a newer version, follow the recommended steps provided in the Reference Platform Porting Guides available under Intel FPGA SDK for OpenCL documentation.

You can install multiple Custom Platforms simultaneously on the same system with the aocl install utility. The Custom Platform subdirectory contains the board_env.xml file.

In a system with multiple Custom Platforms, ensure that the host program uses the FPGA Client Driver (FCD), formerly Altera Client Driver (ACD), to discover the boards rather than linking to the Custom Platform memory-mapped device (MMD) libraries directly.

FCD is set up for you when you run the aocl install utility. The installed BSP is registered on the system so the runtime and SDK utilities can find the necessary BSP files.

Important:

Do not move a BSP to a different directory after you install it. To move a BSP:

  1. Uninstall the BSP from its current location with the aocl uninstall utility.
  2. Change the BSP directory.
  3. Reinstall the BSP in the new location with the aocl install utility.

Did you find the information on this page useful?

Characters remaining:

Feedback Message