A newer version of this document is available. Customers should click here to go to the newest version.
1. HDMI Intel® FPGA IP Quick Reference
2. HDMI Overview
3. HDMI Intel® FPGA IP Getting Started
4. HDMI Hardware Design Examples
5. HDMI Source
6. HDMI Sink
7. HDMI Parameters
8. HDMI Simulation Example
9. HDMI Intel® FPGA IP User Guide Archives
10. Document Revision History for the HDMI Intel® FPGA IP User Guide
4.3.1.1. Transceiver Native PHY (RX)
4.3.1.2. PLL Intel FPGA IP Cores
4.3.1.3. PLL Reconfig Intel FPGA IP Core
4.3.1.4. Multirate Reconfig Controller (RX)
4.3.1.5. Oversampler (RX)
4.3.1.6. DCFIFO
4.3.1.7. Sink Display Data Channel (DDC) & Status and Control Data Channel (SCDC)
4.3.1.8. Transceiver Reconfiguration Controller
4.3.1.9. VIP Bypass and Audio, Auxiliary and InfoFrame Buffers
4.3.1.10. Transceiver Native PHY (TX)
4.3.1.11. Transceiver PHY Reset Controller
4.3.1.12. Oversampler (TX)
4.3.1.13. Clock Enable Generator
4.3.1.14. Platform Designer System
5.1. Source Functional Description
5.2. Source Interfaces
5.3. Source Clock Tree
5.4. Link Training Procedure
5.5. FRL Clocking Scheme
5.6. Valid Video Data
5.7. Source Deep Color Implementation When Support FRL = 0
5.8. Source Deep Color Implementation When Support FRL = 1
5.9. Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM)
5.1.1. Source Scrambler, TMDS/TERC4 Encoder
5.1.2. Source Video Resampler
5.1.3. Source Window of Opportunity Generator
5.1.4. Source Auxiliary Packet Encoder
5.1.5. Source Auxiliary Packet Generators
5.1.6. Source Auxiliary Data Path Multiplexers
5.1.7. Source Auxiliary Control Port
5.1.8. Source Audio Encoder
5.1.9. HDCP 1.4 TX Architecture
5.1.10. HDCP 2.3 TX Architecture
5.1.11. FRL Packetizer
5.1.12. FRL Character Block and Super Block Mapping
5.1.13. Reed-Solomon (RS) Forward Error Correction (FEC) Generation and Insertion
5.1.14. FRL Scrambler and Encoder
5.1.15. Source FRL Resampler
5.1.16. TX Oversampler
5.1.17. Clock Enable Generator
5.1.18. I2C Master
6.1.1. Sink Word Alignment and Channel Deskew
6.1.2. Sink Descrambler, TMDS/TERC4 Decoder
6.1.3. Sink Auxiliary Decoder
6.1.4. Sink Auxiliary Packet Capture
6.1.5. Sink Video Resampler
6.1.6. Sink Auxiliary Data Port
6.1.7. Sink Audio Decoder
6.1.8. Status and Control Data Channel (SCDC) Interface
6.1.9. HDCP 1.4 RX Architecture
6.1.10. HDCP 2.3 RX Architecture
6.1.11. FRL Depacketizer
6.1.12. Sink FRL Character Block and Super Block Demapper
6.1.13. Sink FRL Descrambler and Decoder
6.1.14. Sink FRL Resampler
6.1.15. RX Oversampler
6.1.16. I2C Slave
6.1.17. I2C and EDID RAM Blocks
6.1.18. Variable Refresh Rate(VRR) and Auto Low Latency Mode (ALLM)
4.3.1.8. Transceiver Reconfiguration Controller
You can use the Transceiver Reconfiguration Controller IP core to change the device transceiver settings at any time.
You can selectively reconfigure any portion of the transceiver. The reconfiguration of each portion requires a read-modify-write operation (read first, then write). The read-modify-write operation modifies only the appropriate bits in a register and does not affect the other bits.
The Transceiver Reconfiguration Controller is only available and required in Arria V and Stratix V devices. Because the RX and TX transceivers share a single controller, the controller requires Platform Designer interconnects, such as Avalon-MM Master Translator and Avalon-MM Slave Translator, in the Platform Designer system.
- The Avalon-MM Master Translator provides an interface between this controller and the RX Multirate Reconfig Controller.
- The Avalon-MM Slave Translator arbitrates the RX and TX reconfiguration event for this controller.