HDMI Intel® FPGA IP User Guide

ID 683798
Date 12/15/2021

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.2. Specifying IP Parameters and Options

Follow these steps to specify the HDMI Intel® FPGA IP parameters and options.
  1. Create a Intel® Quartus® Prime project using the New Project Wizard available from the File menu.
  2. On the Tools menu, click IP Catalog.
  3. Under Installed IP, double-click Library > Interface > Protocols > Audio&Video > HDMI Intel® FPGA IP .
    The parameter editor appears.
  4. Specify a top-level name for your custom IP variation. This name identifies the IP variation files in your project. If prompted, also specify the targeted FPGA device family and output file HDL preference. Click OK.
  5. Specify parameters and options in the HDMI parameter editor:
    • Optionally select preset parameter values. Presets specify all initial parameter values for specific applications (where provided).
    • Specify parameters defining the IP functionality, port configurations, and device-specific features.
    • Specify options for generation of a timing netlist, simulation model, testbench, or example design (where applicable).
    • Specify options for processing the IP files in other EDA tools.
  6. Click Generate to generate the IP and supporting files, including simulation models.
  7. Click Close when file generation completes.
  8. Click Finish.
  9. If you generate the HDMI Intel® FPGA IP instance in a Intel® Quartus® Prime project, you are prompted to add Intel® Quartus® Prime IP File (.qip) and Intel® Quartus® Prime Simulation IP File (.sip) to the current Intel® Quartus® Prime project.