HDMI Intel® FPGA IP User Guide

ID 683798
Date 12/15/2021

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents Oversampler (TX)

The Oversampler (TX) transmits data by repeating each bit of the input word a given number of times and constructs the output words.

The oversampling factor is fixed at 5. The Oversampler (TX) assumes that the input word is only valid every 5 clock cycles. This block enables when the outgoing data stream is determined to be below the TX transceiver minimum link rate by reading once from the DCFIFO every 5 clock cycles.