Intel® Stratix® 10 Configuration User Guide

ID 683762
Date 1/10/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents Programming .jic files into Serial Flash Device

To program the .jic into the serial flash device through the JTAG interface, perform the following steps:

  1. In the Programmer window, click Hardware Setup and select the desired download cable.
  2. In the Mode list, select JTAG.
  3. Select the device to be programmed and click Add File.
  4. Select the .jic to be programmed to the selected device.
  5. Click Start to start programming.