eCPRI Intel® FPGA IP User Guide

ID 683685
Date 2/22/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.9. External ST Source Interface

Table 40.  Signals of the External ST Source InterfaceAll signals are synchronous to ext_sink_clk.
Signal Name Width (Bits) I/O Direction Description
ext_source_valid 1 Output Avalon® source valid from L2/L3 parser to external user logic.

This signal is synchronous to ext_sink_clk signal.

ext_source_data DATA_WIDTH 7 Output Avalon® source write data from L2/L3 parser to external user logic.
ext_source_sop 1 Output Avalon® source start of packet from L2/L3 parser to external user logic. Indicate the beginning of packet.
ext_source_eop 1 Output Avalon® source end of packet from L2/L3 parser to external user logic. Indicates the end of packet.
ext_source_empty LOG2(DATA_WIDTH7/8) Output Avalon® source empty from L2/L3 parser to external user logic. Indicates the number of symbols that are empty, that is, do not represent valid data.
ext_source_error 1 Output Avalon® source error from L2/L3 parser to external user logic. A bit mask to mark errors affecting the data being transferred in the current cycle.
ext_source_pkt_type 3 Output Indicate frame type of the packet output from L2/L3 parser to external user logic.
  • 000b: eCPRI
  • 001b: PTP
  • 010b: Misc

This signal is synchronous with ext_source_valid signal.

7 This is set to 64. This parameter is hidden from user and you can't change it.