eCPRI Intel® FPGA IP User Guide

Download PDF
ID 683685
Date 8/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. Getting Started 3. IP Parameters 4. Functional Description 5. Interface Overview 6. IP Registers 7. eCPRI Intel FPGA IP User Guide Archives 8. Document Revision History for eCPRI Intel® FPGA IP User Guide
1. Introduction x
1.1. Supported Features 1.2. Device Family Support 1.3. eCPRI Intel® FPGA IP Device Speed Grade Support 1.4. Resource Utilization 1.5. Intel® FPGA IP Core Verification 1.6. Release Information
2. Getting Started x
2.1. Installing and Licensing 2.2. Specifying the IP Core Parameters and Options 2.3. Generated File Structure 2.4. Simulating the IP Core 2.5. Compiling the Full Design and Programming the FPGA
2.2. Specifying the IP Core Parameters and Options x
2.2.1. Reference and System PLL Clock for your IP Design
4. Functional Description x
4.1. Interfaces 4.2. High Level Data Path Flow 4.3. Operation of the eCPRI IP Blocks
4.2. High Level Data Path Flow x
4.2.1. Transmit TX Path 4.2.2. Receive RX Path 4.2.3. Supported Ethernet Variants
4.3. Operation of the eCPRI IP Blocks x
4.3.1. Packet Classifier 4.3.2. Ethernet Header Insertion/Removal 4.3.3. Concatenation/De-concatenation 4.3.4. Header Mapper/De-Mapper 4.3.5. eCPRI IWF Type 0 4.3.6. eCPRI Message 5 Packet Parser 4.3.7. Packet Queue 4.3.8. eCPRI Message Type 4.3.9. Error Handling 4.3.10. RX Throttling
4.3.8. eCPRI Message Type x
4.3.8.1. eCPRI Message Type 0- IQ Data Transfer 4.3.8.2. eCPRI Message Type 1- Bit Sequence Transfer 4.3.8.3. eCPRI Message Type 2- Real Time Control Data 4.3.8.4. eCPRI Message Type 3- Generic Data Transfer 4.3.8.5. eCPRI Message Type 4- Remote Memory Access 4.3.8.6. eCPRI Message Type 5- One-Way Delay Measurement 4.3.8.7. eCPRI Message Type 6- Remote Reset 4.3.8.8. eCPRI Message Type 7- Event Indication 4.3.8.9. eCPRI Message Type 64- 255 Vendor Specific
5. Interface Overview x
5.1. Clock Signals 5.2. Power, Reset, and Firewalls Signals 5.3. TX Time of Day Interface 5.4. RX Time of Day Interface 5.5. Interrupt 5.6. Configuration Avalon® Memory-Mapped Interface 5.7. Ethernet MAC Source Interface 5.8. Ethernet MAC Sink Interface 5.9. External ST Source Interface 5.10. External ST Sink Interface 5.11. eCPRI IP Source Interface 5.12. eCPRI IP Sink Interface 5.13. Miscellaneous Interface Signals 5.14. IWF Type 0 eCPRI Interface 5.15. IWF Type 0 CPRI MAC Interface
5.2. Power, Reset, and Firewalls Signals x
5.2.1. Reset Control and Initialization Flows
5.7. Ethernet MAC Source Interface x
5.7.1. E-tile Hard IP for Ethernet 1588 PTP Signals 5.7.2. 25G Ethernet MAC 1588 PTP Signals 5.7.3. 10G Ethernet MAC 1588 PTP Signals
5.14. IWF Type 0 eCPRI Interface x
5.14.1. IWF Source Interface 5.14.2. IWF Sink Interface
5.15. IWF Type 0 CPRI MAC Interface x
5.15.1. CPRI 32-bit IQ Data TX Interface 5.15.2. CPRI 64-bit IQ Data TX Interface 5.15.3. CPRI 32-bit Ctrl_AxC TX Interface 5.15.4. CPRI 64-bit Ctrl_AxC TX Interface 5.15.5. CPRI 32-bit Vendor Specific TX Interface 5.15.6. CPRI 64-bit Vendor Specific TX Interface 5.15.7. CPRI 32-bit Real-time Vendor Specific TX Interface 5.15.8. CPRI 64-bit Real-time Vendor Specific TX Interface 5.15.9. CPRI Gigabit Media Independent Interface (GMII) 5.15.10. CPRI IP L1 Control and Status Interface
1. Introduction
2. Getting Started
3. IP Parameters
4. Functional Description
5. Interface Overview
6. IP Registers
7. eCPRI Intel FPGA IP User Guide Archives
8. Document Revision History for eCPRI Intel® FPGA IP User Guide

3. IP Parameters

You customize the IP core by specifying parameters in the IP parameter editor.
Table 9.  Parameters: Configuration Tab
Parameter Supported Values Default Setting Description
Transceiver Tile to be used E

F

H

 E You can choose:
  • H-tile or E-tile for your Intel® Stratix® 10 device
  • E-tile or F-tile for your Intel® Agilex™ 7 device
Note: This parameter is not present in the Intel® Arria® 10 IP variations.
Data Width 64 64 Primary data bus width.
Protocol Revision 1 1 Specifies eCPRI protocol revision used in eCPRI common header.

This option is grayed out in the current version of the Intel® Quartus® Prime software.

Delay Measurement off

one_step

two_step

 one_step Indicates option to support and the operation mode of delay measurement for eCPRI message type 5 delay measurement.

When set to off, the IP does not include the delay measurement logic.

RX external data path FIFO depth 64

128

256

 64 Indicates the depth of the RX external data path FIFO.

The actual depth is log2 of the FIFO depth.

Queue Miscellaneous FIFO depth 32

64

128

256

 64 Indicates the depth of the Queue miscellaneous FIFO.

The actual depth is log2 of the FIFO depth.

Queue PTP FIFO Depth 32

64

128

256

 32 Indicates the depth of the Queue PTP FIFO.

The actual depth is log2 of the FIFO depth.

Advance Mapping Mode On

Off

 On When you turn on this parameter with the mf_en bit set in eCPRI Common Control register, it allows the mapping of the destination MAC address and VLAN tag CSE to eCPRI message PC_ID field.
Pair with ORAN On

Off

 Off Turn on this option to pair your eCPRI Intel® FPGA IP with Intel® O-RAN FPGA IP. You can also pair your eCPRI Intel® FPGA IP with any external vendor O-RAN IP.
Note: When you turn on this parameter, the eCPRI Intel FPGA IP only supports message type 0, 2, and 5.
Streaming On

Off

 Off Indicates Ethernet frame size.
When you turn off this parameter, the maximum Ethernet frame size can be 1500 bytes, and when you turn on, the maximum Ethernet frame size can be 9,000 bytes.
Note: When you turn on this parameter, the sink_pkt_size port is available at the Sink Interface of the eCPRI Intel FPGA IP.
Interworking Function (IWF) Support On

Off

 Off Turn on this option to connect your eCPRI IP with one CPRI IP node.
The eCPRI Intel FPGA IP currently support IWF Type 0 only. It does not support IWF type 1 and type 2 in current release of the IP.
Note: When you turn on this parameter, the eCPRI Intel FPGA IP supports message type 0, 2, 5, 6 and 7 with IWF function.
Interworking Function (IWF) Type 0 0 Specifies eCPRI IP IWF type configuration. Currently the IP support IWF Type 0 configuration.
Interworking Function (IWF) Number of CPRI 1 1 Specifies the number of CPRI MAC that can connect to IWF.
Remote Memory Access Timer Bit-width 12 12 Specifies bit-width of the request-response sequence timer for the eCPRI message type 4.

This parameter triggers the timeout no memory access response.

One-way Delay Measurement Time Bit-width 16 16 Specifies bit-width of the request-response sequence timer for the eCPRI message type 5,One-way delay measurement.

This parameter triggers the timeout no memory access response.

Remote Reset Timer Bit-width 12 12 Specifies bit-width of the request-response sequence timer for the eCPRI message type 6.

This parameter triggers the timeout no memory access response.

Default MAC Source Address - 0x000000000000 Default MAC source address after cold and soft reset.
Default MAC Destination Address 0 - 0x000000000000 Default MAC destination address 0 after cold and soft reset.
Default MAC Destination Address 1 - 0x000000000000 Default MAC destination address 1 after cold and soft reset.
Default MAC Destination Address 2 - 0x000000000000 Default MAC destination address 2 after cold and soft reset.
Default MAC Destination Address 3 - 0x000000000000 Default MAC destination address 3 after cold and soft reset.
Default MAC Destination Address 4 - 0x000000000000 Default MAC destination address 4 after cold and soft reset.
Default MAC Destination Address 5 - 0x000000000000 Default MAC destination address 5 after cold and soft reset.
Default MAC Destination Address 6 - 0x000000000000 Default MAC destination address 6 after cold and soft reset.
Default MAC Destination Address 7 - 0x000000000000 Default MAC destination address 7 after cold and soft reset.
Default VLAN ID - 0x000 Default VLAN ID after cold and soft reset.
Data Flow Identification MACADDR

VLANID

 MACADDR Use MAC Address or VLAN ID for Data Identification.
Packets Arbitration Scheme L2COS

Fixed

 Fixed Specifies the TX packets arbitration scheme.
TX Packets Default Priority 0 to 7 7 Indicates the default priority for S/M/other plane packets that doesn’t contain VLAN ID within L2 header.
TX Arbitration Queue 0 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 0 depth. FIFO width is 8 Bytes.
TX Arbitration Queue 1 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 1 depth. FIFO width is 8 bytes.
TX Arbitration Queue 2 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 2 depth. FIFO width is 8 bytes.
TX Arbitration Queue 3 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 3 depth. FIFO width is 8 bytes.
TX Arbitration Queue 4 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 4 depth. FIFO width is 8 bytes.
TX Arbitration Queue 5 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 5 depth. FIFO width is 8 bytes.
TX Arbitration Queue 6 Depth 0

32

64

128

256

 128 Indicates the TX arbitration queue 6 depth. FIFO width is 8 bytes.
TX Arbitration Queue 7 Depth 32

64

128

256

 128 Indicates the TX arbitration queue 7 depth. FIFO width is 8 bytes.
For parameters in the Example Design tab, refer to the eCPRI Intel Stratix 10 FPGA Design Example User Guide.
Related Information
Level Two Title