A newer version of this document is available. Customers should click here to go to the newest version.
3.3.6.1.1. Machine Status Register (mstatus)
3.3.6.1.2. Machine Trap-Vector Base-Address Register (mtvec)
3.3.6.1.3. Machine Interrupt Register (mip and mie)
3.3.6.1.4. Machine Exception Program Counter Register (mepc)
3.3.6.1.5. Machine Cause Register (mcause)
3.3.6.1.6. Machine Trap Value Register (mtval)
4.3.1. General-Purpose Register File
4.3.2. Arithmetic Logic Unit
4.3.3. Multipy and Divide Units
4.3.4. Floating-Point Unit
4.3.5. Custom Instruction
4.3.6. Instruction Cycles
4.3.7. Reset and Debug Signals
4.3.8. Control and Status Registers
4.3.9. Trap Controller (CLINT)
4.3.10. Memory and I/O Organization
4.3.11. RISC-V based Debug Module
4.3.12. Error Correction Code (ECC)
4.3.13. Branch Prediction
4.3.14. Lockstep Module
4.3.9.1.1. Machine Status Register (mstatus)
4.3.9.1.2. Machine Trap-Vector Base-Address Register (mtvec)
4.3.9.1.3. Machine Interrupt Register (mip and mie)
4.3.9.1.4. Machine Exception Program Counter Register (mepc)
4.3.9.1.5. Machine Cause Register (mcause)
4.3.9.1.6. Machine Trap Value Register (mtval)
4.3.9.1.7. Machine Second Trap Value Register (mtval2)
4.4.1.1. Machine Mode (M-mode)
The default operating mode is Machine mode (M-mode). The core boots up into M-mode after power-on reset. M-mode provides low-level access to the machine implementation and all CSRs.