A newer version of this document is available. Customers should click here to go to the newest version.
184.108.40.206.1. Build and Install Netdev Driver 220.127.116.11.2. Enable VFs if SRIOV is Supported 18.104.22.168.3. Configure the Number of Channels Supported on the Device 22.214.171.124.4. Configure the MTU Value 126.96.36.199.5. Configure the Device Communication 188.8.131.52.6. Configure Transmit Queue Selection Mechanism 184.108.40.206.7. Test Procedure by Using Name Space Environment 220.127.116.11.8. PIO Test
18.104.22.168.4. Configure the MTU Value
Select the MTU value so that, the sum of the MTU value and Ethernet header length is aligned to 64.
Use the following command to set the MTU value:
$ ifconfig ifc_mcdma0 mtu <mtu value>
For example, the following command sets the MTU value as 1522. In this case, the sum of the MTU and the Ethernet header is 1536, which is aligned to 64.
$ifconfig ifc_mcdma0 mtu 1522
Did you find the information on this page useful?