Intel Acceleration Stack Quick Start Guide: Intel FPGA Programmable Acceleration Card D5005

Download PDF
ID 683394
Date 7/09/2021
Public
Document Table of Contents
Document Table of Contents x
1. About this Document 2. System Requirements and Release Installation 3. Installing the OPAE Software Package 4. Identify the FPGA Interface Manager (FIM) and BMC Firmware Version 5. Running FPGA Diagnostics 6. Running the OPAE in a Non-Virtualized Environment 7. Running the OPAE in a Virtualized Environment 8. Intel® Acceleration Stack Quick Start Guide: Intel® FPGA PAC D5005 Archives 9. Document Revision History for Intel® Acceleration Stack Quick Start Guide: Intel® FPGA PAC D5005 A. Handling Graceful Thermal Shutdown B. FPGA Device Access Permission C. Memlock Limit D. Troubleshooting Frequently Asked Questions (FAQ)
2. System Requirements and Release Installation x
2.1. Unpacking the Intel® FPGA PAC 2.2. Precautions for Hardware Installation 2.3. Hardware Installation 2.4. Setting Up the Host Machine Software
2.4. Setting Up the Host Machine Software x
2.4.1. Installing Red Hat* Enterprise Linux* version 7.6 2.4.2. Installing the Intel Acceleration Stack 2.4.3. Verifying the Installation
2.4.2. Installing the Intel Acceleration Stack x
2.4.2.1. Installing the Intel Acceleration Stack Runtime Package on the Host Machine 2.4.2.2. Installing the Intel Acceleration Stack Development Package on the Host Machine
3. Installing the OPAE Software Package x
3.1. Unpacking and Installing the Intel FPGA Driver and the OPAE Software Development Kit (SDK) 3.2. Installing the PACSign
4. Identify the FPGA Interface Manager (FIM) and BMC Firmware Version x
4.1. Updating the FIM and BMC
4.1. Updating the FIM and BMC x
4.1.1. Updating the FIM and BMC using the fpgaotsu
6. Running the OPAE in a Non-Virtualized Environment x
6.1. Loading an AFU Image into the FPGA 6.2. Running the Hello FPGA Example
7. Running the OPAE in a Virtualized Environment x
7.1. Updating Settings Required for VFs 7.2. Configuring the VF Port on the Host 7.3. Running the Hello FPGA Example on Virtual Machine 7.4. Disconnecting the VF from the VM and Reconnecting to the PF
D. Troubleshooting Frequently Asked Questions (FAQ) x
D.1. Why do I see a 'No Suitable slots found' message when running fpgasupdate on my AFU image? D.2. Which environment variables are required? D.3. What actions do I take if I see the error message 'Error enumerating resources: no driver available'? D.4. Command lsmod | grep fpga shows no output after installing the OPAE driver. How to successfully install the OPAE driver? D.5. Command rpm -qa | grep opae does not return the installed opae rpm package. How to successfully install the packages? D.6. What action do I take if the Intel® FPGA PAC D5005 does not show up on the PCIe bus? D.7. Why does the PCIe not detect the Intel® FPGA PAC D5005 card?
1. About this Document
2. System Requirements and Release Installation
3. Installing the OPAE Software Package
4. Identify the FPGA Interface Manager (FIM) and BMC Firmware Version
5. Running FPGA Diagnostics
6. Running the OPAE in a Non-Virtualized Environment
7. Running the OPAE in a Virtualized Environment
8. Intel® Acceleration Stack Quick Start Guide: Intel® FPGA PAC D5005 Archives
9. Document Revision History for Intel® Acceleration Stack Quick Start Guide: Intel® FPGA PAC D5005
A. Handling Graceful Thermal Shutdown
B. FPGA Device Access Permission
C. Memlock Limit
D. Troubleshooting Frequently Asked Questions (FAQ)

4.1. Updating the FIM and BMC

The following table provides instructions to update the FIM based on the release currently running on the Intel® FPGA PAC D5005.
Table 3.   FIM Update Method
Current Acceleration Stack Version FIM Version Update Method
2.0.1 beta 8db6b54c-930e-5976-

a03b-09f3c913aa95
  1. Load the temporary MAX10 image to allow successful flash update:
    $ sudo fpgasupdate /usr/share/opae/d5005/one-time-update\
/darby_max10*.bin
  2. Power cycle.
  3. Use the fpgaotsu tool, provided in the release package, as described in the following section: Updating the FIM and BMC using the fpgaotsu.
2.0.1 pre-beta 3faf8a54-b32c-5f83-

8f99-5c7c3ef9ce51
2.0 bfac4d85-1ee8-56fe-

8c95-865ce1bbaa2d

 Use the fpgaotsu tool provided with the release as described in the following section: Updating the FIM and BMC using the fpgaotsu.
2.0 pre-beta a9f2d0f3-b398-57b0-

b34f-d226bf364fee
  1. Follow the Installing the Intel Acceleration Stack Runtime Package on Host Machine and Updating the FIM and BMC using the fpgaflash Tool in the Intel Acceleration Stack Quick Start Guide for Intel® FPGA PAC D5005 2.0 version. Following these steps upgrades your FIM from v2.0 pre-beta to v2.0.
  2. Follow the instructions in this document to reinstall “Intel Acceleration Stack Runtime package” or “Intel Acceleration Stack development package” followed by the steps in the Upgrading the FIM and BMC to Secure State section.

Section Content
Updating the FIM and BMC using the fpgaotsu

Level Two Title