Altera PLL IP Core Parameters - MIF Streaming Tab
|Generate MIF file||Turn on or Turn off||Turn on to generate the .mif for the current PLL profile. You must turn on the Enable dynamic reconfiguration of PLL parameter in the Settings tab before selecting this function. The generated .mif contains a PLL profile, and a collection of physical parameters—such as M, N, C, K, bandwidth, and charge pump—that defines that PLL. You can then load this .mif into the Altera PLL Reconfig IP core.|
|Enable Dynamic Phase Shift for MIF Streaming||Turn on or Turn off||Turn on to store dynamic phase shift properties for PLL reconfiguration. You must turn on the Enable dynamic reconfiguration of PLL parameter in the Settings tab before selecting this function.|
|DPS Counter Selection||C0–C17, All C, or M||Selects the counter to undergo dynamic phase shift.|
|Number of Dynamic Phase Shifts||—||Selects the number of phase shift increments. The size of a single phase shift increment is equal to 1/8 of the VCO period. The default value is 1.|
|Dynamic Phase Shift Direction||Positive or Negative||Determines the dynamic phase shift direction to store into the PLL MIF.|
Did you find the information on this page useful?