A newer version of this document is available. Customers should click here to go to the newest version.
1. Intel® Stratix® 10 Clocking and PLL Overview
2. Intel® Stratix® 10 Clocking and PLL Architecture and Features
3. Intel® Stratix® 10 Clocking and PLL Design Considerations
4. Intel® Stratix® 10 Clocking and PLL Implementation Guides
5. Clock Control Intel® FPGA IP Core References
6. IOPLL Intel® FPGA IP Core References
7. IOPLL Reconfig Intel® FPGA IP Core References
8. Intel® Stratix® 10 Clocking and PLL User Guide Archives
9. Document Revision History for the Intel® Stratix® 10 Clocking and PLL User Guide
2.2.1. PLL Features
2.2.2. PLL Usage
2.2.3. PLL Architecture
2.2.4. PLL Control Signals
2.2.5. Clock Feedback Modes
2.2.6. Clock Multiplication and Division
2.2.7. Programmable Phase Shift
2.2.8. Programmable Duty Cycle
2.2.9. PLL Cascading
2.2.10. Clock Switchover
2.2.11. PLL Reconfiguration and Dynamic Phase Shift
2.2.12. PLL Calibration
4.3.4.1. Design Example 1: .mif Streaming Reconfiguration Using IOPLL Reconfig IP Core
4.3.4.2. Design Example 2: Advanced Mode Reconfiguration Using IOPLL Reconfig IP Core
4.3.4.3. Design Example 3: Clock Gating Reconfiguration Using IOPLL Reconfig IP Core
4.3.4.4. Design Example 4: Dynamic Phase Shift Using IOPLL Reconfig IP Core
6.1.4. IOPLL IP Core Parameters - Dynamic Reconfiguration Tab
Parameter | Legal Value | Description |
---|---|---|
Enable dynamic reconfiguration of PLL | Turn on or Turn off | Turn on to enable the dynamic reconfiguration of this PLL (in conjunction with the IOPLL Reconfig Intel® FPGA IP core). |
Enable access to dynamic phase shift ports | Turn on or Turn off | Turn on to enable the dynamic phase shift interface with the PLL. |
MIF Generation Option 10 | Generate New MIF File, Add Configuration to Existing MIF File, or Create MIF File during IP Generation | Either create a new .mif file containing the current configuration of the I/O PLL by clicking Create MIF File or add this configuration to an existing .mif file by clicking Append to MIF File. A .mif file also can be opted to be generated during IP generation. The generated .mif file contains current PLL profile and a collection of physical parameters—such as M, N, C, K, bandwidth, and charge pump—that defines that PLL. You can use this .mif file during dynamic reconfiguration to reconfigure the I/O PLL to its current settings. |
Path to New/Existing MIF file 10 | — | Enter location and file name of the new .mif file to be created or existing .mif file to be appended. |
Name of Current Configuration 10 | — | Enter the file name of the existing .mif file you intend to add to. |
10 This parameter is only available when Enable dynamic reconfiguration of PLL is turned on.