SDI II Intel® FPGA IP User Guide

ID 683133
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.1.3.2. RX Transceiver Settings

Set the following assignments to your .qsf file to get the RX SDI link working properly:

set_instance_assignment -name HSSI_PARAMETER "flux_mode=FLUX_MODE_BYPASS" -to <rx_serial_pin_name>

set_instance_assignment -name HSSI_PARAMETER "rx_ac_couple_enable=DISABLE" -to <rx_serial_pin_name>

set_instance_assignment -name HSSI_PARAMETER "rx_onchip_termination=RX_ONCHIP_TERMINATION_R_2" -to <rx_serial_pin_name>