Visible to Intel only — GUID: cvm1615173115423
Ixiasoft
1. About the F-Tile Serial Lite IV Intel® FPGA IP User Guide
2. F-Tile Serial Lite IV Intel® FPGA IP Overview
3. Getting Started
4. Functional Description
5. Parameters
6. F-Tile Serial Lite IV Intel® FPGA IP Interface Signals
7. Control and Status Registers
8. Designing with F-Tile Serial Lite IV Intel® FPGA IP
9. F-Tile Serial Lite IV Intel® FPGA IP User Guide Archives
10. Document Revision History for the F-Tile Serial Lite IV Intel® FPGA IP User Guide
Visible to Intel only — GUID: cvm1615173115423
Ixiasoft
4.4.2. RX Reset and Initialization Sequence
The RX reset sequence for F-Tile Serial Lite IV Intel® FPGA IP is as follows:
- Assert rx_pcs_fec_phy_reset_n, rx_core_rst_n, reconfig_reset, and reconfig_sl_reset simultaneously to reset the F-tile hard IP, MAC, and reconfiguration blocks. Release rx_pcs_fec_phy_reset_n and reconfiguration reset after waiting for rx_reset_ack to ensure the blocks are properly reset.
- The IP then asserts the phy_rx_pcs_ready signal after the custom PCS reset is released, to indicate RX PHY is ready for transmission.
- The rx_core_rst_n signal deasserts after phy_rx_pcs_ready signal goes high.
- The IP starts the lane alignment process after the RX MAC reset is released and upon receiving ALIGN paired with START/END or END/START CW.
- The RX deskew block asserts the rx_link_up signal once alignment for all lanes has complete.
- The IP then asserts the rx_link_up signal to the user logic to indicate that the RX link is ready to start data reception.
Figure 25. RX Reset and Initialization Timing Diagram