LVDS Tunneling Protocol and Interface (LTPI) IP User Guide

Download PDF
ID 844310
Date 11/25/2025
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Configuring and Generating the IP 3. Simulating the IP 4. Validating the IP 5. Troubleshooting and Debugging Issues 6. Appendix A: Functional Description 7. Appendix B: Registers 8. Document Revision History for the LVDS Tunneling Protocol and Interface (LTPI) IP User Guide
1. Overview x
1.1. About the LVDS Tunneling Protocol and Interface (LTPI) IP 1.2. About the Document 1.3. Applicable Applications 1.4. Key Concepts 1.5. IP Design Flow 1.6. Design Considerations/Guidelines
1.1. About the LVDS Tunneling Protocol and Interface (LTPI) IP x
1.1.1. IP Release Information 1.1.2. IP Features 1.1.3. IP High-level Block Diagram 1.1.4. Licensing the IP 1.1.5. Device Family Support 1.1.6. Device Speed Grade Support 1.1.7. IP Core Support Levels 1.1.8. IP Performance and Resource Utilization
1.2. About the Document x
1.2.1. Target Audience 1.2.2. Conventions Used in the Document 1.2.3. Acronyms 1.2.4. Reference Documents and Training
1.4. Key Concepts x
1.4.1. Interface Tunneling Principle 1.4.2. LTPI Tunneling Methodology 1.4.3. Clock Topology 1.4.4. LTPI Frame 1.4.5. System-level Block Diagram 1.4.6. Link Management 1.4.7. Signal Description
1.4.4. LTPI Frame x
1.4.4.1. Link Detect and Link Speed Selection Frames 1.4.4.2. Link Detect Frame 1.4.4.3. Link Speed Frame 1.4.4.4. Advertise, Configure, and Accept Frames 1.4.4.5. Advertise Frames 1.4.4.6. Configure Frame 1.4.4.7. Accept Frame 1.4.4.8. LTPI Operational Frames 1.4.4.9. Default I/O Frame 1.4.4.10. Default Data Frame
1.4.6. Link Management x
1.4.6.1. Link Training 1.4.6.2. Link Configuration 1.4.6.3. Operational Mode
1.4.7. Signal Description x
1.4.7.1. Clock and Power Signals 1.4.7.2. Channel Signals 1.4.7.3. Avalon® Memory-Mapped Primary Interface Signals 1.4.7.4. Avalon® Memory-Mapped Secondary Interface Signals 1.4.7.5. Avalon® Memory-Mapped CSR Interface Signals 1.4.7.6. Miscellaneous Interface Signals
2. Configuring and Generating the IP x
2.1. Configuring the Quartus® Prime Project 2.2. Configuring the LVDS Tunneling Protocol and Interface (LTPI) IP 2.3. Generating HDL for Synthesis and Simulation 2.4. Generating the Simulation Design Example
2.2. Configuring the LVDS Tunneling Protocol and Interface (LTPI) IP x
2.2.1. Configuring the LVDS Tunneling Protocol and Interface (LTPI) IP Parameters
2.3. Generating HDL for Synthesis and Simulation x
2.3.1. Quartus® Prime Pro Edition Generated File Structure 2.3.2. Quartus® Prime Standard Edition Generated File Structure
2.4. Generating the Simulation Design Example x
2.4.1. Generated Directory Structure and Files
3. Simulating the IP x
3.1. Design Example Features 3.2. Design Example Components 3.3. Configuring the Design Example Parameters 3.4. Simulating the Design Example
3.4. Simulating the Design Example x
3.4.1. Simulation Testbench Flow 3.4.2. Simulation Output
4. Validating the IP x
4.1. Validating the IP Using Agilex™ 5 Device
4.1. Validating the IP Using Agilex™ 5 Device x
4.1.1. Compiling the Design Example in Hardware on Agilex™ 5 Device 4.1.2. Validating the Design Example in Hardware on Agilex™ 5 Device
4.1.2. Validating the Design Example in Hardware on Agilex™ 5 Device x
4.1.2.1. Configuring the Clocks in Hardware 4.1.2.2. Programming the FPGA 4.1.2.3. Running the Hardware Test
6. Appendix A: Functional Description x
6.1. GPIO Channel 6.2. I2C Channel 6.3. UART Channel 6.4. Data Channel 6.5. OEM Channel
1. Overview
2. Configuring and Generating the IP
3. Simulating the IP
4. Validating the IP
5. Troubleshooting and Debugging Issues
6. Appendix A: Functional Description
7. Appendix B: Registers
8. Document Revision History for the LVDS Tunneling Protocol and Interface (LTPI) IP User Guide

6.3. UART Channel

Figure 36. UART Mapping in LTPI UART Channel

The UART channel works similarly to the LL GPIO channel. The UART transmit data (TXD) and receive data (RXD) lines are oversampled at three times the LL GPIO sampling frequency, which is set by the LTPI frame generation frequency. The Difference in Sampling Frequencies between LL GPIO and UART Oversampling figure shows the difference in sampling frequencies between LL GPIO and UART oversampling.

Figure 37. Difference in Sampling Frequencies between LL GPIO and UART Oversampling

UART sampling occurs every four system clock cycles within each frame to keep the sampling duty cycle close to 50%. This same sampling pattern is used when regenerating the UART data. The following figure shows the LTPI UART sampling distribution.

Figure 38. LTPI UART Sampling Distribution
Level Two Title