GTS Serial Lite IV Intel® FPGA IP User Guide

ID 813966
Date 4/01/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3. GTS Serial Lite IV Intel® FPGA IP Clock Architecture

The GTS Serial Lite IV Intel® FPGA IP has six clocks which generate clocks to different blocks:
  • Transceiver reference clock (xcvr_ref_clk)—Input clock from external clock chips or oscillators which generates clocks for TX PMA and RX PMA. Refer to Parameters for supported frequency range.
  • TX core clock (tx_core_clk)—This clock is derived from transceiver PLL and is used for EFIFO and TX MAC. This clock is also an output clock from the transceiver to connect to the TX user logic.
  • RX core clock (rx_core_clk)—This clock is derived from the Clock Data Recovery (CDR) PLL and is used for EFIFO, RX deskew FIFO, and RX MAC. This clock is also an output clock from the transceiver to connect to the RX user logic.
  • Clock for PMA reconfiguration interface (reconfig_clk)—input clock from external clock circuits or oscillators which generates clocks for transceiver reconfiguration interface in both TX and RX PMA. The clock frequency is 100 to 162 MHz.
  • System PLL clock (sys_clk)—used for TX/RX EFIFO, and PCS.

The following block diagram shows GTS Serial Lite IV Intel® FPGA IP clock domains and the connections within the IP.

Figure 22.  GTS Serial Lite IV Intel® FPGA IP Clock Architecture