MAX® 10 FPGA 10M08S Evaluation Kit User Guide

Download PDF
ID 812857
Date 12/04/2025
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Getting Started 3. Board Components 4. Document Revision History for the MAX® 10 FPGA 10M08S Evaluation Kit User Guide A. Safety and Regulatory Compliance Information
1. Overview x
1.1. Board Component Blocks 1.2. Supported Items Not Included with the Kit
2. Getting Started x
2.1. Powering the Kit 2.2. Installing the Intel® FPGA Download Cable Driver 2.3. Handling the Kit 2.4. Factory Default Switch and Jumper Settings
2.3. Handling the Kit x
2.3.1. Handling the DIP Switches
3. Board Components x
3.1. Board Overview 3.2. Featured Device: MAX® 10 FPGA 3.3. Configuration 3.4. Clock Circuitry 3.5. Arduino Connectors 3.6. General User Input/Output 3.7. Power Supply
3.3. Configuration x
3.3.1. FPGA Programming over External Intel® FPGA Download Cable 3.3.2. Configuring the FPGA Using the Quartus® Prime Programmer 3.3.3. Selecting Internal Configuration Scheme 3.3.4. Generating a .pof File with ICB Settings 3.3.5. Programming Internal Flash Memory
3.4. Clock Circuitry x
3.4.1. General-Purpose Clock
3.6. General User Input/Output x
3.6.1. User-Defined DIP Switch 3.6.2. User-Defined LEDs
3.7. Power Supply x
3.7.1. Power Measurement 3.7.2. Power Distribution System 3.7.3. Temperature Sense
A. Safety and Regulatory Compliance Information x
A.1. Safety and Regulatory Information A.2. Compliance Information
A.1. Safety and Regulatory Information x
A.1.1. Safety Warnings A.1.2. Safety Cautions
1. Overview
2. Getting Started
3. Board Components
4. Document Revision History for the MAX® 10 FPGA 10M08S Evaluation Kit User Guide
A. Safety and Regulatory Compliance Information

3.6.2. User-Defined LEDs

The development board includes five user-defined LEDs. Board references D1 through D5 are user LEDs that allow status and debugging signals to be driven to the LEDs from the designs loaded into the MAX® 10 FPGA device. The LEDs illuminate when a logic 0 is driven, and turn off when a logic 1 is driven. There is no board-specific function for these LEDs.

Table 8.  User-Defined LED Schematic Signal Names and FunctionsThis table lists the user-defined LED schematic signal names and their corresponding MAX® 10 FPGA pin numbers.
Board Reference Schematic Signal Name I/O Standard (V) MAX® 10 FPGA Device Pin Number
D1 LED1 2.0 132
D2 LED2 2.0 134
D3 LED3 2.0 135
D4 LED4 2.0 140
D5 LED5 2.0 141
Level Two Title