Intel® Simics® Simulator for Intel® FPGAs: Intel Agilex® 5 E-Series Virtual Platform User Guide

Download PDF
ID 786901
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About This Document 2. Intel Agilex® 5 E-Series Intel® Simics® Virtual Platform 3. Intel Agilex® 5 E-Series Virtual Platform Component Intel® Simics® Models 4. Running a Simulation with the Intel Agilex® 5 E-Series HPS Model 5. Supported Use Cases A. Document Revision History
1. About This Document x
1.1. Terminology 1.2. List of Acronyms
2. Intel Agilex® 5 E-Series Intel® Simics® Virtual Platform x
2.1. Intel Agilex® 5 E-Series Universal Virtual Platform Overview 2.2. Intel Agilex® 5 E-Series Universal Virtual Platform User-Configurable Parameters 2.3. Intel Agilex® 5 E-Series Virtual Platform Key Capabilities 2.4. On-Chip Memory IP FPGA Fabric Example Design
2.1. Intel Agilex® 5 E-Series Universal Virtual Platform Overview x
2.1.1. Intel Agilex® 5 HPS Component 2.1.2. HPS Subsystem Component 2.1.3. FPGA Fabric Design 2.1.4. qsys_top Component 2.1.5. FPGA Component 2.1.6. Board Component 2.1.7. System Component 2.1.8. Target Script
2.3. Intel Agilex® 5 E-Series Virtual Platform Key Capabilities x
2.3.1. Boot-To-Operating System Prompt 2.3.2. Basic Ethernet 2.3.3. CPU Power-On and Boot Core Selection 2.3.4. Reset Flow 2.3.5. General Purpose I/O (GPIO) Loopback 2.3.6. USB Disks Hot-Plug Support
3. Intel Agilex® 5 E-Series Virtual Platform Component Intel® Simics® Models x
3.1. Intel Agilex® 5 E-Series HPS Intel® Simics® Model 3.2. Virtual Platform HPS Subsystem Components 3.3. Virtual Platform qsys_top Components 3.4. Virtual Platform Board Components
3.1. Intel Agilex® 5 E-Series HPS Intel® Simics® Model x
3.1.1. Intel Agilex® 5 E-Series HPS Intel® Simics® Model Architecture 3.1.2. PSS Subsystem Components 3.1.3. MPU and APS Subsystem 3.1.4. MPFE Subsystem 3.1.5. Additional Intel Agilex® 5 E-Series HPS Components
3.2. Virtual Platform HPS Subsystem Components x
3.2.1. External Memory Interface (EMIF) 3.2.2. Security Device Manager (SDM)
3.3. Virtual Platform qsys_top Components x
3.3.1. FPGA Fabric
3.4. Virtual Platform Board Components x
3.4.1. Marvel EMAC PHY 3.4.2. SD Card device 3.4.3. ONFI NAND Memory Device 3.4.4. SPI Flash Device 3.4.5. AT24Cxx EEPROM Device 3.4.6. I3C Device 3.4.7. USB Disk Device 3.4.8. Intel® Simics® Text Console
4. Running a Simulation with the Intel Agilex® 5 E-Series HPS Model x
4.1. Prerequisites 4.2. Intel® Simics® Simulation Setup for the Intel Agilex® 5 E-Series Device 4.3. Starting the Simulation 4.4. Getting Device Information from the Intel® Simics® Model
1. About This Document
2. Intel Agilex® 5 E-Series Intel® Simics® Virtual Platform
3. Intel Agilex® 5 E-Series Virtual Platform Component Intel® Simics® Models
4. Running a Simulation with the Intel Agilex® 5 E-Series HPS Model
5. Supported Use Cases
A. Document Revision History

2.1.3. FPGA Fabric Design

The FPGA fabric design corresponds to the logic model implemented in the FPGA fabric. In the 23.3 release, this model includes the following components instantiated under the qsys_top component:
  • Example design corresponding to an On-Chip memory.
  • Peripheral Subsystem that includes the same example design with the On-Chip memory.
    Note: Eventually, the example design instances will be replaced by the FPGA peripheral IPs to match GHRD.

Each of the two On-Chip memories included in the FPGA fabric design is connected to HPS-to-FPGA bridges (one to the h2f_bridge and other to the h2f_lw_bridge). HPS can access the On-Chip memory through the bridges for read and write operations. The base address offset mapped to the corresponding HPS-to-FPGA bridge (base_addr parameter) in this virtual platform is set to 0x00. The On-chip memory device is modeled as a DML device using the example_design.dml file, and it is instantiated in the fabric example design, which is implemented as a Python script named sm_fabric_example_design_comp.py.

A block diagram of the FPGA Fabric design is shown in the following figure:

Figure 2. FPGA Fabric Design Block Diagram

The hierarchical names of the FPGA Fabric design components are:

  • FPGA example design connected to H2F bridge: system.board.fpga.soc_inst.example_design
  • Peripheral subsystem: system.board.fpga.soc_inst.periph_subsys
  • FPGA example design connected to H2F_LW: system.board.fpga.soc_inst.periph_subsys.example_design_lw
Level Two Title