E-tile Hard IP Intel® Agilex™ Design Example User Guide: Ethernet, E-tile CPRI PHY and Dynamic Reconfiguration

ID 683860
Date 8/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.1.3. 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Simulation Design Example

The simulation block diagram below is generated using the following settings in the IP parameter editor:
  1. Under the IP tab:
    1. 1 to 4 10GE/25GE with optional RSFEC or 100GE or 1 to 4 channel 10GE/25GE with optional RSFEC and PTP as the core variant.
    2. 10GE/25GE Channel(s) as Active channel(s) at startup if you choose 100GE or 1 to 4 channel 10GE/25GE with optional RSFEC and PTP as the core variant.
    3. Enable RSFEC to use the RS-FEC feature.
  2. Under the 10GE/25GE tab:
    1. 10G or 25G as the Ethernet rate.
    2. Select PCS Only, OTN, or FlexE as Ethernet IP layers.
Note: RS-FEC is not supported in 10GE variant.
Figure 8. Simulation Block Diagram for E-tile Ethernet IP for Intel Agilex FPGA 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Design Examples

The testbench sends traffic through the IP core, exercising the transmit side and receive side of the IP core.

The successful test run displays output confirming the following behavior:

  1. Wait for PLL to lock.
  2. Wait for RX transceiver reset to complete.
  3. Wait for RX alignment.
  4. Send three sets of packet.
  5. Receive and verify the packets.
  6. Displaying Testbench complete.

The following sample output illustrates a successful simulation test run for a 10GE, PCS Only IP core variation.

# Ref clock is 322.265625 MHz
# waiting for EHIP Ready....
# EHIP READY is 1 at time             425955000
# Waiting for RX Block Lock
# EHIP RX Block Lock  is high at time             429395673
# Waiting for RX alignment
# RX deskew locked
# RX lane aligmnent locked
# TX enabled
# *** Sending packets ***
# Start frame detected, byteslip 0, time 431948219
# ** RX checker has received packets correctly!
# ** RX checker is reset.
# *** Second attempt of sending packets ***
# Start frame detected, byteslip 0, time 437204752
# ** RX checker has received packets correctly!
# ** RX checker is reset.
# *** Third attempt of sending packets ***
# Start frame detected, byteslip 0, time 442467492
# ** RX checker has received packets correctly!
# ** PASSED
# **
# *****************************************
# ** Note: $finish    : ./basic_avl_tb_top.sv(246)
#    Time: 445329189 ps  Iteration: 0  Instance: /basic_avl_tb_top
# 1
# Break in Module basic_avl_tb_top at ./basic_avl_tb_top.sv line 246