OpenCL* on Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA Quick Start User Guide

ID 683831
Date 6/05/2020
Public

2.1.1. Release Content

Follow the installation instructions from the Quick Start Guide to set up the Intel® PAC with Intel® Arria® 10 GX FPGA. The release available under $OPAE_PLATFORM_ROOT includes the files for the Intel® PAC with Intel® Arria® 10 GX FPGA 1.2.1 Release. The release includes the following files for OpenCL located in the $OPAE_PLATFORM_ROOT/opencl folder:
  • 1.2.1 OpenCL* Board Support Package (BSP):
    • opencl_bsp
  • OpenCL* example designs tested with:
    • exm_opencl_hello_world_x64_linux.tgz
    • exm_opencl_vector_add_x64_linux.tgz
  • Pre-compiled kernels <aocx>:
    • hello_world.aocx
    • vector_add.aocx
When you install the Intel® Acceleration Stack package and run the initialization script, the environment variables are set. The $OPAE_PLATFORM_ROOT points to the extracted installation package. The release includes the following files for OpenCL located in the $OPAE_PLATFORM_ROOT/opencl folder:
  • 2.0.1 OpenCL* Board Support Package (BSP):
    • opencl_bsp.tar.gz
  • OpenCL* example designs tested with:
    • exm_opencl_hello_world_x64_linux.tgz
    • exm_opencl_vector_add_x64_linux.tgz
  • Pre-compiled kernels <aocx>:
    • hello_world.aocx
    • vector_add.aocx

Did you find the information on this page useful?

Characters remaining:

Feedback Message