1.3. Arria 10 Transceiver Native PHY IP Core v14.1 Revision History
|Added support for multiple silicon revisions supported for ACDS 14.1 version of the Quartus II software.||-|
|Added a new parameter for Interlaken protocol implementation called Enable Interlaken TX random disparity bit. When enabled, a random number is used as a disparity bit.|
|Changed the option "Manual (PLD controlled)" to "Manual (FPGA fabric controlled)" for the RX word aligner mode parameter.||-|
|Changed the option "SATA" to "SATA/SAS" for PMA configuration rules parameter.||-|
|Changed the descriptions of parameters CTLE adaptation mode and DFE adaptation mode.||-|
|The Quartus II software v14.1 requires that you specify a device if your IP core targets the Arria 10 device family. If you do not specify your target Arria 10 device, the IP Upgrade tool insists that your IP core requires upgrade but does not clarify the reason.||You must ensure that you specify a device for your v13.1 Arria 10 Edition or v14.0 Arria 10 Edition IP core variation and regenerate it in the Quartus II software v14.1.|
Did you find the information on this page useful?