A newer version of this document is available. Customers should click here to go to the newest version.
Visible to Intel only — GUID: xzb1583601128716
Ixiasoft
Visible to Intel only — GUID: xzb1583601128716
Ixiasoft
4.1. Intel® FPGA PTC Select Family Dialog Box
When you launch the Intel® FPGA PTC embedded version with an open Intel® Quartus® Prime project, the Intel® FPGA PTC obtains the device information from the project. Alternatively, you can turn on Open an existing PTC file in this dialog box to load the power data for a previously saved design hierarchy.
Select the desired device family, and click OK.
- Once you have selected a device family to model, you cannot change that selection unless you start a new Intel® FPGA PTC instance.
- Currently, the Intel® FPGA PTC supports the Intel® Agilex™ and Intel® Stratix® 10 FPGA device families. You will notice some differences on the Intel® FPGA PTC pages, depending on the device family selected.