DisplayPort Intel® Arria 10 FPGA IP Design Example User Guide

ID 683050
Date 11/12/2021

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.4.5. View the Results

At the end of the demonstration, you will be able to view the results on the HDCP-enabled DisplayPort external sink.

To view the results of the demonstration, follow these steps:

  1. Power up the Intel FPGA board.
  2. Change the directory to <project directory>/quartus/ directory.
  3. Type the following command on the Nios II Command Shell to download the Software Object File (.sof) to the FPGA.
    nios2-configure-sof <Intel Quartus Prime project name>.sof
  4. Power up the HDCP-enabled DisplayPort external source and sink (if you have not done so). The DisplayPort external sink displays the output of your DisplayPort external source.