DisplayPort Intel® Arria 10 FPGA IP Design Example User Guide

ID 683050
Date 11/12/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.4.1. Set Up the Hardware

The first stage of the demonstration is to set up the hardware.

To set up the hardware for the demonstration:

  1. Connect the Bitec DisplayPort FMC daughter card (revision 10) to the Intel® Arria® 10 development kit at FMC port A.
  2. Connect the Intel® Arria® 10 development kit to your PC using a USB cable.
  3. Connect a DisplayPort cable from the DisplayPort RX connector on the Bitec DisplayPort FMC daughter card to an HDCP-enabled DisplayPort device, such as a graphic card with DisplayPort output.
  4. Connect another DisplayPort cable from the DisplayPort TX connector on the Bitec DisplayPort FMC daughter card to an HDCP-enabled DisplayPort device, such as a display monitor with DisplayPort input.