仅对英特尔可见 — GUID: wmv1520633314071
Ixiasoft
4.3. 器件识别寄存器(Device Identification Register)
下表列出了 PCI* Configuration Header Space中只读寄存器的默认值。可使用参数编辑器设置这些寄存器的值。运行中,可使用可选的Hard IP Reconfiguration块信号更改这些寄存器的值。
寄存器名称 |
默认值 |
说明 |
---|---|---|
Vendor ID |
0x1172 |
设置Vendor ID寄存器的只读(read-only)值。根据PCI Express Base Specification,此参数不能设置成0xFFFF。 地址偏移:0x000,位[15:0]。 |
Device ID |
0x0000 |
设置Device ID寄存器的只读值。 地址偏移:0x000,位[31:16]。 |
Revision ID |
0x01 |
设置Revision ID寄存器的只读值。 地址偏移:0x008,位[7:0]。 |
Class code |
0xFF0000 |
设置Class Code寄存器的read-only值。 地址偏移:0x008,位[31:8]。 |
Subsystem Vendor ID |
0x0000 |
设置PCI Type 0 Configuration Space中Subsystem Vendor ID寄存器的只读值。根据PCI Express Base Specification,该参数不可设置为0xFFFF。该值由PCI-SIG分配给器件制造商。并仅用于Root Port类型。 地址偏移:0x02C,位[15:0]。 |
Subsystem Device ID |
0x0000 |
设置PCI Type 0 Configuration Space中Subsystem Device ID寄存器的只读值。此值仅用于Root Port类型。 地址偏移:0x02C,位[31:16]。 |