1.2. Hardware and Software Requirements
The HDMI PHY IP Design Example requires the following hardware and software.
Hardware:
- Arria® 10 GX FPGA Development Kit (10AX115S2F4I1SG)
- HDMI Source GPU
- HDMI Sink (Monitor)
- Bitec HDMI FMC 2.0 daughter card (Revision 11)
- HDMI 2.1 cables
Software:
- Quartus® Prime Pro Edition (for hardware testing)
- ModelSim* - Intel® FPGA Edition, ModelSim* - Intel® FPGA Starter Edition, Riviera-PRO* , VCS* (Verilog HDL only)/ VCS* MX, or Xcelium* Parallel simulator