SDI II Intel® Cyclone 10 GX FPGA IP Design Example User Guide

ID 683815
Date 12/12/2022

4. Revision History for SDI II Intel® Cyclone® 10 GX FPGA IP Design Example User Guide

Document Version Intel® Quartus® Prime Version Changes
2022.12.09 22.4 Added four design example presets to the Parameter Editor.
2022.03.28 21.4 Updated Select Design parameter description for Parallel loopback without external VCXO in SDI II Intel FPGA Design Example Parameters for Intel Stratix 10 Devices table.
2021.10.08 21.3
  • Removed NCSim from the following figure and tables:
    • Figure: Directory Structure for the Design Examples.
    • Table: Other Generated Files in Simulation Folder.
    • Table: Steps to Run Simulation.
  • Edited the list of Software in Hardware and Software Requirements:
    • Changed ModelSim* - Intel® FPGA Edition to Questa* Intel® FPGA Edition .
    • Changed ModelSim* - Intel® FPGA Starter Edition to ModelSim SE* .
2021.08.27 18.0
  • Changed from Streams Interleaved to Multiplex Type to align with SMPTE spec for below:
    • RX/TX/DU Top Signals Table for rx_vid_std, tx_vid_std and sdi_tx_ln_b signals.
    • On-board User LED Functions Table.
    • Figure Sequence of Video Standards for Triple-Rate and Multi-Rate Designs.
    • Description in Simulation Testbench for single-rate and multi-rate designs.
2020.01.29 18.0
  • Updated the Directory Structure section with new folders and files for loopback design and simulation:
    • modelsim_files.tcl
    • ncsim_files.tcl
    • riviera_files.tcl
    • vcs_files.tcl
    • vcsmx_files.tcl
    • xcelium_files.tcl
    • tb_ln_check.v
    • cds.lib
    • hdl.var
  • Added information that the multi-rate designs support rx_coreclk frequency of 297 MHz.
  • Added instructions to run simulation using the Xcelium Parallel Simulator in the Simulating the Design section.
  • Edited the Hardware and Software Requirements section to include the Xcelium Parallel simulator.
  • Edited the description for the tx_pll_refclk_sel signal in the Interface Signals section to include information about the dynamic switching feature.
2017.12.25 17.1.1 Initial release.