Intel® Stratix® 10 Configuration User Guide

ID 683762
Date 10/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.5.1.2. Generating the Initial RSU Image Using .rbf Files

Follow these steps to generate the initial RSU image using .rbf file:

  1. Run the following command to generate a .rbf file from a factory or application image file (.sof).
    quartus_pfg -c factory.sof factory.rbf
    quartus_pfg -c app1.sof app1.rbf
    quartus_pfg -c app2.sof app2.rbf
  2. Run the following command to generate a boot .rbf file from a factory image file (.sof)
    quartus_pfg -c factory.sof boot.rbf -o rsu_boot=ON
  3. On the File menu, click Programming File Generator.
  4. Select Intel® Stratix® 10 from the Device family drop-down list.
  5. Select the configuration scheme from the Configuration mode drop-down list. The current Intel® Quartus® Prime only supports remote system update feature in Active Serial x4.
  6. On the Output Files tab, assign the output directory and file name.
  7. Select the output file type.

    Select the following file types for AS x4 configuration mode:

    • Raw Programming File (.rpd)
  8. On the Input Files tab, click Add Bitstream, select the factory image .rbf file and click Open. Repeat this step for the application image .rbf.
  9. On the Configuration Device tab, click Add Device, select your flash memory and click OK. The Programming File Generator tool automatically populates the flash partitions.
    1. Assign boot.rbf to the BOOT_INFO partition.
    2. Assign factory.rbf to the FACTORY_IMAGE partition.
    3. Assign app1.rbf and app2.rbf to the P1 and P2 respectively.
      Note: P1 and P2 are user-defined partition names.
  10. If you generate the .jic file, select the Flash Loader. On the Configuration Device tab, select Flash Loader, click Select. Select device family and device name. Click OK.
  11. Click Generate to generate the remote system update programming files. After generating the programming file, you can proceed to program the flash memory.
    Figure 70. Generating Remote System Update Programming Files