R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

ID 683501
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Give Feedback

2.2.2.2.1. REFCLK and PERST Guidelines When Using Independent PERST Pins

In Configuration Mode 1 (2x8 Endpoint only), the independent PERST and REFCLK are available with:
  • The IP parameter Enable Independent Perst pins set to enabled.
  • The clock source for refclk2 must be always running.
  • The pin_perst_n pin must qualify the stability of refclk2.
  • The pin_perst_n pin has the highest priority and toggling it affects both Port 0 and Port 1.
  • For Port 0 (P0):
    • The clock source comes from refclk0.
    • The reset source can come from pin_perst0_n at the package level or p0_warm_perst_n_i.
  • For Port 1 (P1):
    • The clock source comes from refclk1.
    • The reset source can come from pin_perst1_n at the package level or p1_warm_perst_n_i.