AN 699: Using the Altera Ethernet Design Toolkit

ID 683469
Date 5/13/2016
Public

1.3.3. Recommended Flow for Using the Ethernet Design Toolkit

  1. Configure the MAC and PHY IP core.
  2. Check the MAC and PHY status to verify that the system is ready for traffic.
  3. Configure the Traffic Controller Generator Module and start traffic transmission.
  4. Check the Traffic Monitor module for information on the received data.
  5. For debugging purposes, check the MAC statistics counter for the transmitted and received packets condition after traffic stops.

Did you find the information on this page useful?

Characters remaining:

Feedback Message