Visible to Intel only — GUID: zgy1522586041728
Ixiasoft
1.1. Release Information
1.2. Device Family Support
1.3. Signals
1.4. Parameters
1.5. Register Map
1.6. Using Generic Serial Flash Interface Intel® FPGA IP
1.7. Generic Serial Flash Interface Intel® FPGA IP Reference Design
1.8. Flash Access Using the Generic Serial Flash Interface Intel® FPGA IP
1.9. Intel HAL Driver
1.10. Generic Serial Flash Interface Intel® FPGA IP User Guide Archives
1.11. Document Revision History for the Generic Serial Flash Interface Intel® FPGA IP User Guide
Visible to Intel only — GUID: zgy1522586041728
Ixiasoft
1.2. Device Family Support
The Generic Serial Flash Interface IP is supported in the following devices:
2 Export the flash pin by enabling the Enable SPI pins interface parameter of this IP.
3 The IP can only access flash that is connected to FPGA GPIO pins. You cannot use the IP to access flash that is connected to SDM for configuration purpose.
4 For Intel Agilex® 7 F-Series and I-Series devices, do not place the exported conduit pins in the same x4 DQ group because they have different Output Enable (OE) signals. OE conflict during compilation can trigger Error(175005). Refer to the Intel Agilex® 7 General Purpose I/O User Guide: F-Series and I-Series and the KDB Answer Error (175005): Could not find a location with: GPIO_SHARED_NOE0 of (locations affected) for more information.