Visible to Intel only — GUID: QSF-ENABLE_BUS_HOLD_CIRCUITRY
Ixiasoft
Visible to Intel only — GUID: QSF-ENABLE_BUS_HOLD_CIRCUITRY
Ixiasoft
ENABLE_BUS_HOLD_CIRCUITRY
Enables bus-hold circuitry during device operation. If this option is turned on, a pin will retain its last logic level when it is not driven, and will not go to a high impedance logic level. The 'Enable Bus-Hold Circuitry' option should not be used at the same time as the 'Weak Pull-Up Resistor' option. This option is ignored if it is applied to anything other than a pin.
Type
Boolean
Device Support
- Agilex 7
- Intel® Arria® 10
- Intel® Cyclone® 10 GX
- Intel® Stratix® 10
Notes
This assignment supports Fitter wildcards.
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name ENABLE_BUS_HOLD_CIRCUITRY <value>
set_global_assignment -name ENABLE_BUS_HOLD_CIRCUITRY -entity <entity name> <value>
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY -to <to> -entity <entity name> <value>
Default Value
Off
Example
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to pin