AN 736: Nios II Processor Booting From Altera Serial Flash (EPCQ)

ID 683104
Date 5/20/2016

1.5.6. Configuration for EPCQ Programming

  1. Ensure that the FPGA device’s Active Serial (AS) pin is routed to the EPCQ flash. This routing allows the flash loader to load into the EPCQ flash and configure the board correctly.
  2. If using a Cyclone® V SoC development board, ensure the MSEL pin setting on the board is configured for AS programming.

Did you find the information on this page useful?

Characters remaining:

Feedback Message